Any assistance on placement would be much appreciated....

https://www.f150online.com/forums/sh...threadid=77180

Cliff

 

The front clamp should be about 1" back from the end of the bottom leaf spring, the rear clamp should be about 2" forward of the end of the 2nd from bottom spring.
The bottom spring, rear already has a clamp on it.

Traction will be improved greatly on slicks, or Nitto 555's not on F1's since they don't know what traction is.
This modification will also stop differential roll up and save a driveshaft.

 

So I needs eight of these puppies then ... Back to the shop!!!

Thanks for the help ...

 

1- each side front, 1 each side rear = 4