Accufab Throttle Bodies
Thread Starter
|
Senior Member
Joined: Dec 2001
Posts: 211
Likes: 0
From: Centreville, VA
Accufab Throttle Bodies
As alot of you are aware, 3 vendors are selling Lightning Throttle Bodies that are manufactured by Accufab...I got curious and called Accufab myself. I did my best "play dumb" act, and the lady at Accufab told me that the Lightning Throttle Bodies will be available DIRECTLY from Accufab in about 1 week.....(no prices will be qouted from me as this is NOT a marketing post) For those of you who like to go to "the source", here is just a heads up!!
Senior Member
Joined: Nov 1999
Posts: 499
Likes: 0
I talked to them, and they said $459, plus you have to swap out the TPS as theirs did not come with it. I think I saw a thread last week that Babolt was going to be selling a non polished one where you have to swap out the TPS for a little over $300.
Senior Member
Joined: Aug 2001
Posts: 396
Likes: 0
From: Frisco, TX
I looked at his web page today and I didn't see that price... if it is 300 or so, I get a check from my wife and call today!!!!
Oh Honeyyyy.... can I get a check from you sweetheart???
Oh Honeyyyy.... can I get a check from you sweetheart???
Trending Topics
Senior Member
Joined: Apr 2000
Posts: 267
Likes: 0
From: Mont belvieu, TX, USA
Accu-Fab billet T/B's
Billet, polished, Accu-Fab Throttle bodies in stock with Lightning specific linkage cam lever and tps installed. Just install it.
Mark/LFP
www.lightningforceperformance.com
Mark/LFP
www.lightningforceperformance.com
Senior Member
Joined: Dec 2000
Posts: 2,365
Likes: 0
From: Elkton, MD
Senior Member
Joined: Oct 2001
Posts: 4,815
Likes: 0
From: Richmond,VA
Originally posted by Silver-Bolt
Yep the BABolt billet T/B for $315 including freight.
Yep the BABolt billet T/B for $315 including freight.
Senior Member
Joined: Jun 2001
Posts: 2,516
Likes: 0
From: Bay Area, California
i emailed the babolt website asking what i would have to do if i bought the $315 t/b and here is what they said:
"Joe,
It is a piece of cake. You just have to grind off the end of the shaft that
has been peened over that holds the lever on the stock throttle body and
reuse your stock TPS. I provide the screws and the directions. As I told
Bill there are a lot of people that complain about price so I figured I
would call them out with price that cannot be matched. You just have to put
a little sweat equity into it. In fact very little sweat and about an hour
and 1/2 of your time to do the modification and install."
"Joe,
It is a piece of cake. You just have to grind off the end of the shaft that
has been peened over that holds the lever on the stock throttle body and
reuse your stock TPS. I provide the screws and the directions. As I told
Bill there are a lot of people that complain about price so I figured I
would call them out with price that cannot be matched. You just have to put
a little sweat equity into it. In fact very little sweat and about an hour
and 1/2 of your time to do the modification and install."