need your input=mods
Thread Starter
|
Senior Member
Joined: Mar 2002
Posts: 376
Likes: 0
From: overthehill , in TAXVILLE= CENTRAL IL :)
need your input=mods
Hi.all well as you can tell iam still strugling with the mod install.
With that said here is once and for all what i plan on doing, No Bull this time LOL
=i need and appreciate your comments and input as usual,thanks here we go
1.JDM single program chip[92 octane street with torque reduction left ON and tranny line pressures left at stock.
2.factory techs valve body
3.jay lincoln's traction bars
4.psp 's/4x4 trans pan and correct filter
5. 2 or 3# (caged lower pulley ) eithr JDM's 2# or lightning forces 3# if it is caged?
6.lightning forces gator back belt's for the stock accessories pulley's alt. ac water pump etc..and one for the new blower pulley = both belts will be the gatorback .
7. alresdy have modified stock /ram air induction and K&N panel filter with added ram.
8. already did the awhittle boost bypass mod =computer friendly.
i am hoping $1200 big ones should be close to cover the cost?
I plan on going with this set up provided enough YES opinions are provided by the ever knowlageable gang on the f150 L board THANKS for your input and time.
the only other mod in the futre will be electric fan and thermostat, i guess i will have to get my chip re-burned for that when the time comes?
With that said here is once and for all what i plan on doing, No Bull this time LOL
=i need and appreciate your comments and input as usual,thanks here we go1.JDM single program chip[92 octane street with torque reduction left ON and tranny line pressures left at stock.
2.factory techs valve body
3.jay lincoln's traction bars
4.psp 's/4x4 trans pan and correct filter
5. 2 or 3# (caged lower pulley ) eithr JDM's 2# or lightning forces 3# if it is caged?
6.lightning forces gator back belt's for the stock accessories pulley's alt. ac water pump etc..and one for the new blower pulley = both belts will be the gatorback .
7. alresdy have modified stock /ram air induction and K&N panel filter with added ram.
8. already did the awhittle boost bypass mod =computer friendly.
i am hoping $1200 big ones should be close to cover the cost?
I plan on going with this set up provided enough YES opinions are provided by the ever knowlageable gang on the f150 L board THANKS for your input and time.
the only other mod in the futre will be electric fan and thermostat, i guess i will have to get my chip re-burned for that when the time comes?
Last edited by EXCITED; Apr 28, 2002 at 10:13 PM.
Senior Member
Joined: Oct 2001
Posts: 4,815
Likes: 0
From: Richmond,VA
Originally posted by EXCITED
will the factory tech valve body not be firm enough?
will the factory tech valve body not be firm enough?
Thread Starter
|
Senior Member
Joined: Mar 2002
Posts: 376
Likes: 0
From: overthehill , in TAXVILLE= CENTRAL IL :)
Originally posted by ICULOKN
The valve body without alittle chip help isnt that firm, its nice but not FIRM, I have medium in my chip and the valve body and love it, on my race side I have it all out power....
The valve body without alittle chip help isnt that firm, its nice but not FIRM, I have medium in my chip and the valve body and love it, on my race side I have it all out power....
Thread Starter
|
Senior Member
Joined: Mar 2002
Posts: 376
Likes: 0
From: overthehill , in TAXVILLE= CENTRAL IL :)
Re: excited
Originally posted by spanky777will
shoot me an e-mail or send me an instant message at spnky874 i got a question for you
shoot me an e-mail or send me an instant message at spnky874 i got a question for you
and private messaging is disabled by site admin? use my profile and e-mail me?
Trending Topics
Banned for Violation of Vendor Rules
Joined: Sep 2001
Posts: 303
Likes: 0
From: Beltsville, Maryland 5 mins from UMD
