Lightning

1/8 mile times

Thread Tools
 
Search this Thread
 
Old Apr 28, 2002 | 03:49 PM
  #1  
LatemodelRacer2's Avatar
Thread Starter
|
Senior Member
Joined: Jan 2002
Posts: 3,709
Likes: 0
From: Jasper Alabama
1/8 mile times

I know alot of yall run 1/4 miles but what is good peed for a L on F1's with a JDM FLip chip street/race ,NGKtr5's, K&N Air filter with bottoim cut out stock box.Hoping for low 8's
 
Reply
Old Apr 28, 2002 | 03:57 PM
  #2  
ICULOKN's Avatar
Senior Member
Joined: Oct 2001
Posts: 4,815
Likes: 0
From: Richmond,VA
Re: 1/8 mile times

Originally posted by LatemodelRacer2
I know alot of yall run 1/4 miles but what is good peed for a L on F1's with a JDM FLip chip street/race ,NGKtr5's, K&N Air filter with bottoim cut out stock box.Hoping for low 8's
I would say 8.40-50 range putting you around a 13.20 or so in the 1/4. Give or take alittle based on traction...
 
Reply
Old Apr 28, 2002 | 05:18 PM
  #3  
CHIKIN1's Avatar
Senior Member
Joined: Jan 2002
Posts: 862
Likes: 0
Latemodel: Why don't you come to the Huntsville Dragstrip next Friday night??? A few of the guys off this board and some other locals are gonna make a night of it!!!


Chikin@Charter.net
---------------------------
Black '01
Born on 5-3-01
#3603 of 6381
410HP/503ft.lbs @ Normal Temp. w/o N2O
JL Logocaps w/Keychain
JL 3# Lower Pulley
Sean Hyland 2# Upper Pulley
JDM Cold Air
JDM Boost Bypass
JDM/Accufab Throttle Body
JDM Longtubes w/ Silver-Bullet cat-back
JDM Cobra R pump
JDM Eletric Fan
JDM 2” Drop Shackles
PSP 4-Way Autologic Chip ( Tow, Street,Track, N20 )
PSP FactoryTech Valvebody
PSP Deep Tranny Pan
PSP DriveShaftLoop
PSP Truck-Traks
PSP Nitrous Plate
Nitrous Express 50-150 Kit ( Can’t decide which jets to use )
NGK / TR6’s ( .040gap )
Hoosier DOT’s 28 x 10 x 16
 
Reply
Old Apr 28, 2002 | 08:28 PM
  #4  
LatemodelRacer2's Avatar
Thread Starter
|
Senior Member
Joined: Jan 2002
Posts: 3,709
Likes: 0
From: Jasper Alabama
i might stop by if i drive my truck to nashville. were going up fri night no wew can be there for the race sat morning.
 
Reply
Old Apr 28, 2002 | 08:29 PM
  #5  
LatemodelRacer2's Avatar
Thread Starter
|
Senior Member
Joined: Jan 2002
Posts: 3,709
Likes: 0
From: Jasper Alabama
i was hopping for better than 8.5 thats not a lot of stock.
 
Reply
Old Apr 28, 2002 | 09:03 PM
  #6  
ICULOKN's Avatar
Senior Member
Joined: Oct 2001
Posts: 4,815
Likes: 0
From: Richmond,VA
Originally posted by LatemodelRacer2
i was hopping for better than 8.5 thats not a lot of stock.
You may be better man, I was just looking through my timesheets when I had the mods like you have...
 
Reply
Old Apr 28, 2002 | 11:00 PM
  #7  
Dank's Avatar
Member
Joined: Sep 2001
Posts: 20
Likes: 0
From: Minneapolis, MN
"Stock" times have supposedly been anywhere from 13.2-14.2. There are a lot of variables that make up that time. I'd say, on an average day, with decent traction, the average stock truck will run 13.8, with an 1/8th around 8.8-8.9. Now, on a track with excellent traction, on a nice cool dry day you will see better times, I have personally only been to the track once. It was a nice cool 40 degrees and the track was very sticky. All I've done to my truck is put straight pipes on it, which some say hurt times but that's a whole different discussion, and I ran an 8.53. So, I'd say with just your chip and filter setup, 8.4-8.5 sounds reasonable, but you could very well go faster.

Dan
 
Reply

Trending Topics

Old Apr 29, 2002 | 09:46 PM
  #8  
Big1Daddy's Avatar
Senior Member
Joined: Jun 2000
Posts: 258
Likes: 0
From: Oak Park, CA USA
8.99 Bone Stock w/slicks
 
Reply
Old Apr 29, 2002 | 09:56 PM
  #9  
TAKECOVER's Avatar
Senior Member
Joined: Nov 2001
Posts: 112
Likes: 0
From: Huntsville, Al
I would say around 8:50-8:60's or so would be about right for the truck with what you have done.

Jimmy

2000 black L JDM stage 1 kit
2000 silver Vette coupe..stock
 
Reply
Old Apr 29, 2002 | 10:58 PM
  #10  
svt360's Avatar
Senior Member
Joined: Jan 2002
Posts: 954
Likes: 0
From: amherst,ny
8.7 swanson chip- 2.0 60'
 
Reply




All times are GMT -4. The time now is 09:51 AM.