Drop Springs
Thread Starter
|
Senior Member
Joined: Jan 2002
Posts: 3,709
Likes: 0
From: Jasper Alabama
Drop Springs
I was wondering if anybody had rated the 3" drop springs from belltech? Also what is the size of the springs width and height.
Im hoping i have the right size and rate at the shop in my spring rack. Also has anybody put afco shocks on the L's.
Im hoping i have the right size and rate at the shop in my spring rack. Also has anybody put afco shocks on the L's.
Senior Member
Joined: Sep 2001
Posts: 389
Likes: 0
From: CORALSPRINGS FL
Well I have the Belltech 3inch drop in mine.The springs I have say they are for a reg f-150,so it really drops our trucks 2inch cause they are already lowerd from Ford.By the way if you lower your truck,when you get it realigned save about 20.00 to 30.00 bucks
for a camber kit..You local shop should have those.Hope this helps.I also have the 2in Belltech shackles in the rear...
for a camber kit..You local shop should have those.Hope this helps.I also have the 2in Belltech shackles in the rear...
Those springs lower the truck 1inch not 2 sorry..And the shackles drop it 2in in the rear.
