here is a good place for billet gas door and lights etc..
$59.00 for gas door
<a target=_new href="http://procarparts.com/store/displaydetails.cfm?pid=FRD-GAS-POL">http://procarparts.com/store/display...id=FRD-GAS-POL</a>


did mine looks great on 2001 black L use the black plastic clips that come with it on the rear end of cap housing screws are not long enough by themselves, it will stick out just a tad in the rear verses the front, looks great with my newley accetoned emblems,glad i did not get the (non polished )billet aluminum , the shinny cap looks

 

thanks, some of us aren't trying to see what is the MOST you can pay for something. Future add-on.

 

I just re-ordered another one a few days ago as they messed up on my first order. Glad to hear it looks good from a second owner.
Are there any pictures of the lights they sell on an L?

 

I got one of these in today. The holes do not line up on mine. The two near the hinge are of just a bit. The two on the other end are not even close. Called the company already, and they said to call back. I'll post again after talking to them.

 

mine worked fine had to drill th 2 holes on hinge side out just a tad its on my 01 and working fine.

 

EXCITED, did you do anything with the screws on the other side where the plastic clips were? They don't align with anything. I have no clue what to do with those. And I broke one of the metal clips that came on the hinge side. The company said send it back at my expense. I'd rather just get it on somehow. Thanks.

 

i drilled out the 2 hindge holes a little did not use the 2 center screws left them just like they came mounted with nuts andused the plastic clips on the back 2 to hold it to truck,slid plastic clips where screws would go into them ,works finemy truck

 

EXCITED, could you please explain a little more how to use the plastice clips oppisite the hinge? I can't picture how to use them. Thanks.

 

slide the clips on the edge of your cap housing at the rear area , where the holes in the cobra lid lign up with the clips attached to your truck and screw the 2 screws into your clips,
so that the clips are attached to the trck body housing with the slit in the clip, and the screwwhole facing your screw .
the clip attaches to your truck and then you screw your 2 rear screws into the clips ,that are attached to the truck via the slit in the clip.

 

Finally got it right! Did have to drill the holes near the hinge. Thogh it was pretty easy, I was nervous as hell about the drilling. Looks awesome. Thanks EXCITED!