Lightning

Will this get me into the 12's????

Thread Tools
 
Search this Thread
 
Old Mar 24, 2002 | 09:05 PM
  #1  
Lightning#838's Avatar
Thread Starter
|
Senior Member
Joined: Jan 2002
Posts: 540
Likes: 0
From: Pembroke Pines, Fl
Will this get me into the 12's????

1999 L:
JL Air Filter
JL 4# pulley
JL Diablo sport chip
90 mm mass air
Borla Cat-back
Denso IT-22s

I'm thinkin low 13's high 12's. What do you think?
 
Reply
Old Mar 24, 2002 | 09:16 PM
  #2  
TheHylandr's Avatar
Senior Member
Joined: Mar 2002
Posts: 362
Likes: 0
From: Albuquerque, NM
I ran a 12.79 @ 108 this weekend with a JDM Flip Chip, JDM 2LB Lower Pulley, JL Stage 2 Ram / Cold Air, Line Mod Valve and Boost ByPass I ran full weight, nothing removed and 3/4 tank of gas.

I also lowered the pressure in the rear F1s to 25 PSI
 
Reply
Old Mar 24, 2002 | 09:17 PM
  #3  
Lightning Boy's Avatar
Senior Member
Joined: Jan 2000
Posts: 1,300
Likes: 0
From: Sugar Land, Texas
Im thinking a mid to high 12 if you can get some traction.
 
Reply
Old Mar 24, 2002 | 09:17 PM
  #4  
Lightning#838's Avatar
Thread Starter
|
Senior Member
Joined: Jan 2002
Posts: 540
Likes: 0
From: Pembroke Pines, Fl
Do you have a 99-00 or 01-02??? Big Difference
 
Reply
Old Mar 24, 2002 | 09:28 PM
  #5  
Lightning Boy's Avatar
Senior Member
Joined: Jan 2000
Posts: 1,300
Likes: 0
From: Sugar Land, Texas
With a C/F/P(2#) and slicks, we were able to pull off several 8.0x's in the 1/8 with our 99. That will convert into a 12.6 - 12.7 in the 1/4.

You have enough to make 12's, if you can launch it.
 
Reply
Old Mar 24, 2002 | 09:54 PM
  #6  
01whiteLight's Avatar
Registered User
Joined: Sep 2001
Posts: 151
Likes: 0
From: Orange, CA
theoretically it should, but traction is a very big factor.
 
Reply
Old Mar 24, 2002 | 10:24 PM
  #7  
HyE_BoLt's Avatar
Senior Member
Joined: Nov 2000
Posts: 212
Likes: 0
From: California
That truck better be well in the 12z, if not, send all the stuff back. I wen 13.32 @ 101 with just intake and exhaust and ET streets. So figure half f that stuff is gonna give u 3 tenths. i think its a go. Good luck
 
Reply

Trending Topics

Old Mar 24, 2002 | 10:28 PM
  #8  
Lightning#838's Avatar
Thread Starter
|
Senior Member
Joined: Jan 2002
Posts: 540
Likes: 0
From: Pembroke Pines, Fl
You guys are giving me good news.
 
Reply
Old Mar 24, 2002 | 10:50 PM
  #9  
MiamiWhiteSVT-L's Avatar
Senior Member
Joined: Nov 2001
Posts: 1,037
Likes: 0
From: Orlando, FL
Originally posted by Lightning#838
You guys are giving me good news.
Hey, I'm going to Moroso Wednesday..................If you wanna run your truck as is, without whatever you got on the way, let me know.............maybe we can meet up there or something.....I'm running bone stock, cause I wanna get a baseline run for comparison before I start modding next week............doing chip and throttle body, maybe the PSP/Factory Tech valve body also, depending how much I make on ebay this week.....I know it's gonna take a while to get it shipped since they're running behind on those orders, but at least I'll put the order in.

Anyways, email me................jguerr23@aol.com..........i get home 10-ish.........I can reply to you then..

lates,
JC
 
Reply
Old Mar 24, 2002 | 11:00 PM
  #10  
poweredbySVT's Avatar
Senior Member
Joined: Sep 2001
Posts: 175
Likes: 0
From: South Florida
Unhappy

For all the rest of you good ole USA. WE are talking SOUTH FLORIDA. BIG Heat, BIGGER Humidity. We run consistently 3-4 tenths slower and at LEAST 2-3 mph slower than MOST of the rest of the country. For goodness sakes.....our COLDEST day this year at our track on a Test n Tune night was LOW 60's.

But I did squeek a 12.8@105 in that weather.

Don't forget Moroso WPB...the "REAL" slickest track of the south!!

Good Luck
 
Reply
Old Mar 24, 2002 | 11:11 PM
  #11  
Pantera's Avatar
Senior Member
Joined: May 2001
Posts: 423
Likes: 0
From: Hampstead,Md USA
My'01 went 12.57 @109 with just a JL Diablo chip and a #3 JL pulley.
 
Reply
Old Mar 25, 2002 | 01:33 AM
  #12  
JBLsilver01's Avatar
Senior Member
Joined: Apr 2001
Posts: 595
Likes: 0
From: Conroe TX
13.0 here w/the only hp adders being chip, intake and throttle body. Other factors are the ET STreets and a home-made air tube thing, but with your mods I would say mid to high 12's easy. The only way youd get a 13 would be if you gunned it hard off the line and spun bad............
 
Reply
Old Mar 25, 2002 | 01:35 AM
  #13  
ICULOKN's Avatar
Senior Member
Joined: Oct 2001
Posts: 4,815
Likes: 0
From: Richmond,VA
I went 12.50 with a 3lb lower, JL chip & filter, on ET's with the same setup I could do 12.60's with 1.8x's on the F1's....
 
Reply




All times are GMT -4. The time now is 06:08 AM.