Paging JL / or ANYONE who knows
Thread Starter
|
Senior Member
Joined: Jan 2002
Posts: 862
Likes: 0
Paging JL / or ANYONE who knows
I have a Sean Hyland 2 1/2# upper pulley and a 3# JL Lower I got from a buddy...Will the suppied belt that came with the 3# Lower work or be too loose???
---------------------------
Black '01
Born on 5-3-01
#3603 of 6381
K&N Box Filter
Sean Hyland 2# Upper Pulley
JL 3# Lower
JDM Boost Bypass
PSP 4-Way Autologic Chip ( Tow, Street, N20 Street, N20 Track )
PSP Electric fan&CobraR water pump
PSP Longtubes w/Twin Magnaflow
PSP FactoryTech Valvebody
PSP Deep Tranny Pan
PSP DriveShaftLoop
PSP Nitrous Plate
Nitrous Express 50-150 EFI Kit
NGK / BR7 spark plugs .036gap
Mickey Thompson ET-STREETS
---------------------------
Black '01
Born on 5-3-01
#3603 of 6381
K&N Box Filter
Sean Hyland 2# Upper Pulley
JL 3# Lower
JDM Boost Bypass
PSP 4-Way Autologic Chip ( Tow, Street, N20 Street, N20 Track )
PSP Electric fan&CobraR water pump
PSP Longtubes w/Twin Magnaflow
PSP FactoryTech Valvebody
PSP Deep Tranny Pan
PSP DriveShaftLoop
PSP Nitrous Plate
Nitrous Express 50-150 EFI Kit
NGK / BR7 spark plugs .036gap
Mickey Thompson ET-STREETS
Senior Member
Joined: Aug 2001
Posts: 726
Likes: 0
From: Mobile, Alabama
Have you tried to put the stock belt back on. If it will fit without breaking the tension stop off I would use it. The 68" belt for the 3# is probably going to be just a bit long. The stock 67" would be close so you may have to get a 67.5". Your just going to have to try it with you combo.