dyno in Ga
Thread Starter
|
Member
Joined: Aug 2001
Posts: 60
Likes: 0
From: Atlanta, Ga
dyno in Ga
Hey guys. I own a 2000 turbo TA but went to dyno today at a place called Higgins Ford Performance. They are in Douglasville Ga.
They charge 75 bux for 3 pulls or 85 with a wideband. I ran 6 times with a wideband and was charged 150.00.....pretty good for the Atlanta area I guess. They had a TON of mustangs with blowers on most everything. I was quite intimidated when I pulled up and saw all those nice looking stangs but the personnel made me feel very welcomed and didnt hold my GM car against me
Anyway, my point is this would be a dyno place that I would highly recommend. They let me take as much time in between runs as i needed.....explained all the stuff that was going on and showed/explained to me everything on the computer. I was very impressed at the service offered to a rookie like myself. If you bring a floppy along they will give you your dyno files as well so you can view them later. Most places do this I believe. I pulled 471rwhp/542 rwtq. Now if I could just become a better racer and apply this to the track. Also in Jonesboro there is a Dynojet that charges 60 for 3 pulls but he has no wideband. I dont know about the level of service either. These are some alternatives to Atlanta Chassis Dyno or Dynolab for those of us in the suburbs
They charge 75 bux for 3 pulls or 85 with a wideband. I ran 6 times with a wideband and was charged 150.00.....pretty good for the Atlanta area I guess. They had a TON of mustangs with blowers on most everything. I was quite intimidated when I pulled up and saw all those nice looking stangs but the personnel made me feel very welcomed and didnt hold my GM car against me
Anyway, my point is this would be a dyno place that I would highly recommend. They let me take as much time in between runs as i needed.....explained all the stuff that was going on and showed/explained to me everything on the computer. I was very impressed at the service offered to a rookie like myself. If you bring a floppy along they will give you your dyno files as well so you can view them later. Most places do this I believe. I pulled 471rwhp/542 rwtq. Now if I could just become a better racer and apply this to the track. Also in Jonesboro there is a Dynojet that charges 60 for 3 pulls but he has no wideband. I dont know about the level of service either. These are some alternatives to Atlanta Chassis Dyno or Dynolab for those of us in the suburbs
Senior Member
Joined: Apr 2001
Posts: 5,939
Likes: 0
From: Warner Robins, Ga, CSA
Holy shxx! What numbers Jerry!
Guys, Jerry is planning on being at SDR on the 26th. You may take him on out to the 1/8th or maybe even the 1,000' mark, but he reeled me in like I was standin' still after that. Super nice guy--willin' to help anybody---welll, most anybody . He surely helped me get into the 12s--he's my GM tuner
!
It'll be great to see ya again Mr. Turbo!
Dan
Guys, Jerry is planning on being at SDR on the 26th. You may take him on out to the 1/8th or maybe even the 1,000' mark, but he reeled me in like I was standin' still after that. Super nice guy--willin' to help anybody---welll, most anybody
. He surely helped me get into the 12s--he's my GM tuner !It'll be great to see ya again Mr. Turbo!
Dan
