Hangers?
Thread Starter
|
Senior Member
Joined: Dec 2001
Posts: 150
Likes: 0
From: Austin TX.
Hangers?
I've got the ground force 1/2, and want too drop the rear end some more. I was thinkin on going with the 2" rear hangers,and moving the shakles too the one inch drop hole. Does this sound like a good idea. If so, does anyone know where I can get this. Also what else would I need besides the hangers? Dageon
Senior Member
Joined: Nov 2001
Posts: 6,166
Likes: 0
From: Burlington, Ma
Senior Member
Joined: Oct 2001
Posts: 4,815
Likes: 0
From: Richmond,VA
you will prob sit unlevel if you do that. I have a bell tech 3/4 kit that turned out to be a 2/4 on a L. I moved the rear shakels up to the 2nd hole and made it a 2/3 drop kit. Just keep this in mind with only a 1 in drop up front...
Thread Starter
|
Senior Member
Joined: Dec 2001
Posts: 150
Likes: 0
From: Austin TX.
I see that we all have the fastest color
Got to love it.
ICU, I already have the 1/2 drop done. I think that it dropped the front more hten an inch. I've been look at the dropping the back some more. I have measured the difference from front to back and it's about 1.25". I just can't find a place to buy just the hangers. Any clue or help would be appreciated.
Dageon
Got to love it. ICU, I already have the 1/2 drop done. I think that it dropped the front more hten an inch. I've been look at the dropping the back some more. I have measured the difference from front to back and it's about 1.25". I just can't find a place to buy just the hangers. Any clue or help would be appreciated.
Dageon
