93 Lightning camshaft troubles....
Thread Starter
|
Senior Member
Joined: Oct 2000
Posts: 114
Likes: 0
From: Lewes, DE, USA
93 Lightning camshaft troubles....
hey guys,
My 93 Lightning needs a new cam & lifters.
I was going to buy the Crane kit for $165, but another
Lightning sight had a guy who lost power & ET &
would recommend against the Crane.
any ideas or suggestions???
thanks,
My 93 Lightning needs a new cam & lifters.
I was going to buy the Crane kit for $165, but another
Lightning sight had a guy who lost power & ET &
would recommend against the Crane.
any ideas or suggestions???
thanks,
Senior Member
Joined: Jul 2001
Posts: 1,122
Likes: 0
From: Illinois
Cobrakid,
Once the NLOC is back up go to the Discussion Forums and then scroll down to the ILLNESS section. Ask for a guy named Ray from Streamwood (user name LGHTSPD). He has a really bad *** Gen 1 and he might help you with the cam selection. Good Luck dude.
Once the NLOC is back up go to the Discussion Forums and then scroll down to the ILLNESS section. Ask for a guy named Ray from Streamwood (user name LGHTSPD). He has a really bad *** Gen 1 and he might help you with the cam selection. Good Luck dude.
Senior Member
Joined: Mar 2001
Posts: 614
Likes: 0
From: Cuttin' Heads with Jack Butler at the CrossRoads!
CobraKid, RobG's right. Once the nloc board is back up (www.nloc.org), you'll be able to find more information there as there's a seperate group just for gen1 trucks. This forum seems to mostly Gen2 people, but it nevers hurts to ask.
Senior Member
Joined: Nov 2001
Posts: 6,166
Likes: 0
From: Burlington, Ma
Cobrakid
You could also go over to http://www.svtperformance.com/forums/index.php?s=
and ask over there.
Jim at JDM knows a lot about the Gen 1's
http://www.svtperformance.com/forums...?s=&forumid=54
You could also go over to http://www.svtperformance.com/forums/index.php?s=
and ask over there.
Jim at JDM knows a lot about the Gen 1's
http://www.svtperformance.com/forums...?s=&forumid=54