Lightning

Need help with engine miss!

Thread Tools
 
Search this Thread
 
Old Sep 5, 2001 | 01:11 PM
  #16  
Skank Dog's Avatar
Thread Starter
|
Senior Member
Joined: Nov 2000
Posts: 1,126
Likes: 0
From: Texas
WHAT04- I got to lookin' at all the plugs a while ago and I saw that bad boy on the passanger rear!! Daaaaammmmmn!!! This is gonna be fun!

Spiro- I took the two front plugs out on each side just to look at them. The one on passanger side front looks new still, its burning clean. The one on the drivers side front had carbon buildup on the bottom edges of the plug and a little on the platinum as well.
Which one is the #5 that you said may be the culprit?
Thanks for the tape info. On the first one I put back in, it left the socket on the plug!! Had to pull it back out again. Oh well, atleast ya'll have made it alot easier for me though!!
Thanks again-I'll let ya know tomorrow how things went.
 
Reply
Old Sep 5, 2001 | 01:21 PM
  #17  
Spiro99SVT's Avatar
Senior Member
Joined: Oct 1999
Posts: 2,497
Likes: 0
From: EVERYWHERE
Number 5 is the first plug on the drivers side. If it broke off you would see it, and it might look aot like the photo I posted on page 1 of this topic.
Good luck, and be patient
 
Reply
Old Sep 5, 2001 | 03:20 PM
  #18  
Redneck Ferrari's Avatar
Senior Member
Joined: Mar 2001
Posts: 940
Likes: 0
Thumbs up Magnetic telecope is a MUST have.

The 7mm bolts will not be a problem that way.
Remember, Patients is a virture.
 
Reply
Old Sep 6, 2001 | 01:39 PM
  #19  
Skank Dog's Avatar
Thread Starter
|
Senior Member
Joined: Nov 2000
Posts: 1,126
Likes: 0
From: Texas
Well crap!! Just finished installing the NGK TR6's. Took me 1.5 hours! But, the damn miss is still there!!! WTF? The plugs didnt look bad at all, but the rear one on drivers side wasnt even tightened down!! Any ideas on what to do next?
 
Reply




All times are GMT -4. The time now is 12:11 AM.