<< Gen Ii Parts >>
Here is a short list of what I have. I did try to post in the classifieds, but I was recieving some type of error. WEBMASTER or Doug, feel free to move there in need be.EATON M112 BLOWER
Complete supercharger with only 30K wear. The rotors do have some TEFLON peeling off, like all the others do. Includes: Underdrive pulley (installed), Stock TB, upper Intake,intercooler,. Asking 600 dollars OBO
JL IC POWER COOLER BOX
Only used for the WFC4 in St.Louis. Cooler box has three small tears (1") where covering meets inner fender. Will sell with 0 guage BLK battery cable to bed. You will need misc. hosing for cooler box. Asking 300 with battery cable OBO
PSP LOWER PULLEY
Less that 2K on pulley without tools. asking 150
HUGHES PERFORMANCE DEEP SUMP TRANNY PAN
Pan holds 4 more quarts than stock.Cast aluminum BLK. ribbed for extra cooling,drainplug. The best pan available for the GEN II L's. Asking 150 OBO
NITROUS EXPRESS "wet" KIT
The kit that made me famous. Like new condition with 15 lb. bottle. Includes pressure activated heater,purge,solenoids,lines,brackets.Complete with PSP custom NITROUS PLATE. Cost over 1K for complete kit. Asking 800 OBO
CUSTOM 15 INCH DRAG WHEELS
CustomSteel Drag wheels. Require caliper grinding, and dust shield removal. Wheels are equipped with tubes and ALMOST NEW (only 3 runs) Mickey Thompson ET Streets size 28 x 12.5 x 15. Low 1.7's 60' times. **LOCAL SALE ONLY** Asking 700 OBO
PSP 4-way CHIP (3.73's 0nly) CUX1
Latest and greatest programs available.
1- PSP street file
2- PSP RACE
3-CUSTOM NITROUS program mid 11's with a 100 shot
4-"KILLER" 150 shot program (nothing even comes close)
FLIP-CHIP CUX2
Superchip/JDM flip chip. Programs were MY custom design from when I worked with JDM. Offers a street and race file requiring a 50/50 mixture of 93/100 octane fuel for the race side. Can be reburned. Used once, and still in box. **WHY PAY FOR A NEW CHIP WHEN YOU COULD REBURN ANY ONE OF MINE**
Asking 175 OBO
SILVER CAN CHIPS
-CUSTOM Race file for 3.73's, shift-kit,ram-air,Intake kit, pulley. Old file, but ran in the 12.30's with listed MODS and DRAG tires. 2 Available, can be reburned. Asking 100 dollars each OBO
-MATCHING STREET FILE for above. 2 available 100 dollars each OBO
CUX1 PCM
Looking for a CUX1 PCM ?? CONTACT ME
FUEL PUMP ASSEMBLY
Direct drop-in. Complete with twin 255 lph fuel pumps (new) never used. Sending unit included. Simply remove stock set-up for the ULTIMATE fuel supply set-up. Asking 250 OBO
CERVINIS 3INCH COWL HOOD
Perfect fit. BLK needs new paint. **LOCAL SALE ONLY** Asking 350 OBO
These parts will be available starting Sept. 1st for delivery. More parts will be available at a later time.
** DOES NOT INCLUDE SHIPPING COSTS**
THE GREEK
EMPTYPOCKETRACN@aol.com
Complete supercharger with only 30K wear. The rotors do have some TEFLON peeling off, like all the others do. Includes: Underdrive pulley (installed), Stock TB, upper Intake,intercooler,. Asking 600 dollars OBO
JL IC POWER COOLER BOX
Only used for the WFC4 in St.Louis. Cooler box has three small tears (1") where covering meets inner fender. Will sell with 0 guage BLK battery cable to bed. You will need misc. hosing for cooler box. Asking 300 with battery cable OBO
PSP LOWER PULLEY
Less that 2K on pulley without tools. asking 150
HUGHES PERFORMANCE DEEP SUMP TRANNY PAN
Pan holds 4 more quarts than stock.Cast aluminum BLK. ribbed for extra cooling,drainplug. The best pan available for the GEN II L's. Asking 150 OBO
NITROUS EXPRESS "wet" KIT
The kit that made me famous. Like new condition with 15 lb. bottle. Includes pressure activated heater,purge,solenoids,lines,brackets.Complete with PSP custom NITROUS PLATE. Cost over 1K for complete kit. Asking 800 OBO
CUSTOM 15 INCH DRAG WHEELS
CustomSteel Drag wheels. Require caliper grinding, and dust shield removal. Wheels are equipped with tubes and ALMOST NEW (only 3 runs) Mickey Thompson ET Streets size 28 x 12.5 x 15. Low 1.7's 60' times. **LOCAL SALE ONLY** Asking 700 OBO
PSP 4-way CHIP (3.73's 0nly) CUX1
Latest and greatest programs available.
1- PSP street file
2- PSP RACE
3-CUSTOM NITROUS program mid 11's with a 100 shot
4-"KILLER" 150 shot program (nothing even comes close)
FLIP-CHIP CUX2
Superchip/JDM flip chip. Programs were MY custom design from when I worked with JDM. Offers a street and race file requiring a 50/50 mixture of 93/100 octane fuel for the race side. Can be reburned. Used once, and still in box. **WHY PAY FOR A NEW CHIP WHEN YOU COULD REBURN ANY ONE OF MINE**
Asking 175 OBO
SILVER CAN CHIPS
-CUSTOM Race file for 3.73's, shift-kit,ram-air,Intake kit, pulley. Old file, but ran in the 12.30's with listed MODS and DRAG tires. 2 Available, can be reburned. Asking 100 dollars each OBO
-MATCHING STREET FILE for above. 2 available 100 dollars each OBO
CUX1 PCM
Looking for a CUX1 PCM ?? CONTACT ME
FUEL PUMP ASSEMBLY
Direct drop-in. Complete with twin 255 lph fuel pumps (new) never used. Sending unit included. Simply remove stock set-up for the ULTIMATE fuel supply set-up. Asking 250 OBO
CERVINIS 3INCH COWL HOOD
Perfect fit. BLK needs new paint. **LOCAL SALE ONLY** Asking 350 OBO
These parts will be available starting Sept. 1st for delivery. More parts will be available at a later time.

** DOES NOT INCLUDE SHIPPING COSTS**
THE GREEK
EMPTYPOCKETRACN@aol.com
Spiro
I just posted a test classified, then deleted it. The system seems to be up.
I cannot move this to the Clasifieds. If you send Steve an email with the Error you got he can likely help.
Doug
I just posted a test classified, then deleted it. The system seems to be up.
I cannot move this to the Clasifieds. If you send Steve an email with the Error you got he can likely help.
Doug
Last edited by Silver_2000; Aug 15, 2001 at 01:19 AM.
Guys you really might want to consider buying all the above parts together because they must have some kind of magical combination about them to run 11.40 on the brakes at WFC4. Hell, most of us would love to run 11.40's period much less have time to only run an 8.xx in the 1/8 and still run a 11.40 with just enough time to get on the brakes at the end. Must be magic!! LMAO!!
Also Spiro you might want to part with that F-16 chip you got that you hooked to the front of your L to make that run!! Can I get first dibs on that one???
Also Spiro you might want to part with that F-16 chip you got that you hooked to the front of your L to make that run!! Can I get first dibs on that one???
HANKFAN,
I would not sell you ANYTHING!! Your one person who likes to start trouble around here between JDM and PSP. And comments like that really make you seem even more stupid than you look. Im detting out of here, but yet you still feel you need to "bash" somoene. Maybe you need to get yourself a girlfriend and not stroke your L so much.

Go sing the blues elsewhere.......Hows that Nitrous kit.......still scared..LOL
THE GREEK
I would not sell you ANYTHING!! Your one person who likes to start trouble around here between JDM and PSP. And comments like that really make you seem even more stupid than you look. Im detting out of here, but yet you still feel you need to "bash" somoene. Maybe you need to get yourself a girlfriend and not stroke your L so much.


Go sing the blues elsewhere.......Hows that Nitrous kit.......still scared..LOL
THE GREEK
Spiro, please contact me with the error you are receiving in the Classifieds. This will be the THIRD thread closed requesting you do not post FOR SALE items here. Any subsequent threads will simply be deleted.




Did you total your truck out or what? Why would you be selling all of these parts? Did I miss something?