Where to buy 2000 80mm mass and injectors
Thread Starter
|
Senior Member
Joined: Dec 1999
Posts: 131
Likes: 0
From: MS
Where to buy 2000 80mm mass and injectors
I am looking to buy a lightning 80mm mass air and injectors from a lightning. My plan is to get rid of my fmu and run the mass air with the injectors. Do any of you know if a mass air from a lightning would work in combination with the injectors?
Senior Member
Joined: Jun 2000
Posts: 1,006
Likes: 0
From: Monrovia, CA
I'm sure its possible to swap in the 80mm mass air and injectors, but you would probably need a chip (or a chip reburn if you already have one) to compensate for these additions, as the stock Expy computer is programmed for the smaller stuff you would be pulling out.
Check out www.fordpartsonline.com. They have very competitive prices.
Check out www.fordpartsonline.com. They have very competitive prices.
Last edited by DB; Aug 13, 2001 at 05:47 PM.
Senior Member
Joined: Feb 2001
Posts: 1,248
Likes: 0
From: MOTORCITY
injectors
the L injectors are 42 lbs. you can check out www.cprracing.com
248 398-2397 ask for goran
if you call tell them robert staley sent ya.
i have a 80 mm pro-m that is calibrated for the 42 lbs.
they just had a big article in 5.0 magazine
248 398-2397 ask for goran
if you call tell them robert staley sent ya.
i have a 80 mm pro-m that is calibrated for the 42 lbs.
they just had a big article in 5.0 magazine