F-250 trans pan
Thread Starter
|
Senior Member
Joined: Feb 2001
Posts: 194
Likes: 0
From: San Pedro, Ca, USA
F-250 trans pan
Could somone tell me the part number of the F-250's trans pan and any other parts I'll need to make the conversion. What type of trannie fluid and how much? And any opinons on this mod? thanks alot
Senior Member
Joined: Apr 2000
Posts: 4,402
Likes: 0
From: On the side of the Road attempting to explain 135 miles per hour
Z28,
I bought the parts (pan and filter) and am doing this conversion in conjuction with a Line Mod Valve on Saturday. the new pan has a drain plug also...
part numbers and prices right off my invoice from http://www.fordpartsonline.com
Pan: f81z-7a194-ba $27.31
Filter: yc3z-7a098-ba 16.73
total with shipping: $52.04
The gasket is reuseable.
Since I'm draining the converter also, I bought two cases of Valvoline ATF Mercon III and will keep the extra. My guess is it will take approx. 17 or 18 quarts.
look for a thread by me early next week.
hope this helps.
I bought the parts (pan and filter) and am doing this conversion in conjuction with a Line Mod Valve on Saturday. the new pan has a drain plug also...
part numbers and prices right off my invoice from http://www.fordpartsonline.com
Pan: f81z-7a194-ba $27.31
Filter: yc3z-7a098-ba 16.73
total with shipping: $52.04
The gasket is reuseable.
Since I'm draining the converter also, I bought two cases of Valvoline ATF Mercon III and will keep the extra. My guess is it will take approx. 17 or 18 quarts.
look for a thread by me early next week.
hope this helps.