Long time no chat here ... Need some new go fast mods !!
I see a lot of people have there L's running well now =). I have a air raid filter and superchips chip so far. I want to get into the 12's on the street, and maybe high 11 with NoS at the track. I seen spiro's times, dang. Any advice on what to do first? I have not kept up in the last 6 months or so, and i am a bit out of the loop.
Thanks
low4show@hotmail.com
Thanks
low4show@hotmail.com
Thanks Baddoggie, i am trying to keep it, working 2 jobs and trying to get my garage built. I need some help though with what to get i have not really read the board a lot in a few months.
don't know what yr. L you have ashenor? if not an 01, get a 90mm maf(and chip upgrade). see my sig if you have an 01. i'm adding a throttle body(single oval blade) and oil breather filter(chip change or upgrade).
not saying this is the best or only way--just offering some suggestions.
dan
not saying this is the best or only way--just offering some suggestions.
dan
Ah forgot to say, mine is a 2000. I see the the 90 mm is a big thing but what i see is i have to get a new chip right?
So
New chip
90 mm
Airraid still work or something new ?
What else do i need?
So
New chip
90 mm
Airraid still work or something new ?
What else do i need?
Trending Topics
Ashenor,
Get your chip reburned. The tuners found a few extra ponies this year. AFAIK, JDM has the best Superchips street program at this time. He'll reburn it for $75.
Next biggest bang for the buck for you is a new pulley for $250. I plan on going with the PSP lower pulley, but not until after my warranty is gone.
If that doesn't work, a 100 hp shot of NO2 will.
90mm MAF and a new throttle body may eak out a few HP, but at a high $/HP. I'd do the pulley thing first.
Get your chip reburned. The tuners found a few extra ponies this year. AFAIK, JDM has the best Superchips street program at this time. He'll reburn it for $75.
Next biggest bang for the buck for you is a new pulley for $250. I plan on going with the PSP lower pulley, but not until after my warranty is gone.
If that doesn't work, a 100 hp shot of NO2 will.
90mm MAF and a new throttle body may eak out a few HP, but at a high $/HP. I'd do the pulley thing first.


