Lowering
Want to drop the front 2 and the back 4, But also want to keep this trucks handeling above 80 and beyond. But also stiffen up from dead stop acceleration. She's a little to light at take off.
Depends on your budget too. Hotchkis is great but not cheap. Belltech drop spindles will get you 2" lower in the front with no major changes in handling because it's basically all OEM except its 2" down. Spring and shock loads are the same. In the rear, you can use shackles, or aftermarket leafs like TVS, fiberglas ones, whatever.
Then there are the budgetless guys who rip out everything back there and build a 4-link coil-over or air suspension deal. Do a search on a LIghtning-specific forum and you'll find tons of options.
Then there are the budgetless guys who rip out everything back there and build a 4-link coil-over or air suspension deal. Do a search on a LIghtning-specific forum and you'll find tons of options.






