All 5 of the first batch of WMS 3.4 MONSTER INLETS are completed and I have them here ready for shipment next week. I also have the lazer cut throttle body adaptor brackets as well. The very last thing I'm waiting on is the GT500 Tbody o-ring seal, then the units will ship out to those paid up. As you will see all hardware needed will come with these units.

Also attached are comparison pictures of the MONSTER INLET and the 2.3 inlet, I think you will see that these MONSTER INLETS will greatly improve flow.

All but one of these inlets are spoken for so if your intersted then please call and I'll get it right out to you with the rest when they ship.

For now, enjoy the pictures





















JJ@WMS

 

That looks great JJ. I be looking for one on a brown truck near me, soon. I plan to do some testing against the cheezzy Whipple 2.3l inlet that came with my 3.4L on my new aluminum stroker motor. Should flow plenty of much needed airflow for this new Monster Stroker! So this new 160mm Monoblade flows 1900cfm?

 

Yes, that 160mm Monoblade flows 1900cfm.

Yours went out today UPS and you will love it.

JJ

 

Great stuff as allways J.J.

 

I dont see and pics....

 

is that paint on the flange and inside the intake?

 

No thats powedercoat. What you dont see is that we machined a groove into both flanges for sealing. The Tbody seals with an OEM GT500 Tbody oring and the supercharger flange end seals with either anaerobic sealer or silicone, the groove on that end is to facilitate sealing.

JJ@WMS

 

ok so it is powdercoat on the blower flange and inside the intake

 

No, just the flange, there is no powdercoating inside the inlet itself, what you see is a touch of overspray and shadow from the picture.

JJ

 

nooice.

 

Here is a quick vid of one installed.

MONSTER INLET

JJ@WMS