dynojet--South Georgia Corvettes--Thomasville
Thread Starter
|
Senior Member
Joined: Apr 2001
Posts: 5,939
Likes: 0
From: Warner Robins, Ga, CSA
dynojet--South Georgia Corvettes--Thomasville
ran a search on dynojet to get a location in my area. found 7 or 8 in and around atlanta, and one(see above) south of macon.
called sgc and spoke to the owner. happy to run my 01L on his machine and it will be his first Lightning. $75 for two runs or $150/hr. if tuning.
thomasville is about 1.5 hrs. from but i'm going to get my first ever dynomometer test/run.
i welcome any suggestions as this is a new deal for me.
------------------
2001 Lightning, silver, JL chip(street), air intake, & drive shaft loop, escort 8500, ranger 2950dx dual band radio, wilson 2000 ant., bot/picked up on 05/08/01, 1997 f150 xlt 4.6L 4x2 with: a/f one fipk, superchip, optima battery, bbk 75mm throttle body, edelbrock ias shocks--2001 lightning to come(she came--see above)
"nothin' but a bunch a low-life white trash drinkin' too much cheap alcohol"
"I don't take s**t from guys who drive Lightnings," the cop said. "You're speedin' when you're sittin' on the parkin' ramp."
"some days you eat the bear and some days the bear eats you."
[This message has been edited by LIGHTNINROD (edited 06-21-2001).]
called sgc and spoke to the owner. happy to run my 01L on his machine and it will be his first Lightning. $75 for two runs or $150/hr. if tuning.
thomasville is about 1.5 hrs. from but i'm going to get my first ever dynomometer test/run.
i welcome any suggestions as this is a new deal for me.
------------------
2001 Lightning, silver, JL chip(street), air intake, & drive shaft loop, escort 8500, ranger 2950dx dual band radio, wilson 2000 ant., bot/picked up on 05/08/01, 1997 f150 xlt 4.6L 4x2 with: a/f one fipk, superchip, optima battery, bbk 75mm throttle body, edelbrock ias shocks--2001 lightning to come(she came--see above)
"nothin' but a bunch a low-life white trash drinkin' too much cheap alcohol"
"I don't take s**t from guys who drive Lightnings," the cop said. "You're speedin' when you're sittin' on the parkin' ramp."
"some days you eat the bear and some days the bear eats you."
[This message has been edited by LIGHTNINROD (edited 06-21-2001).]
Senior Member
Joined: Apr 2001
Posts: 946
Likes: 0
From: Over yonder somewhere
Go to Atlanta. $75 for two pulls is to high. Engineered Performance is who I always went to (off of I-75) three pulls were $65. When are you planning on going? I've been itching to get mine done. Talk to Ed. We (Cobra guys over on BON) used them a couple of times for a dyno day. We helpful and easy to work with.
BTW, Atlanta Chassis dyno is another well used dyno.
------------------
Paul
'01 Silver L
Moderator: FASTasL at EFI-Street.com
[This message has been edited by CornerCarver (edited 06-21-2001).]
BTW, Atlanta Chassis dyno is another well used dyno.
------------------
Paul
'01 Silver L
Moderator: FASTasL at EFI-Street.com
[This message has been edited by CornerCarver (edited 06-21-2001).]
Senior Member
Joined: Apr 2001
Posts: 946
Likes: 0
From: Over yonder somewhere
I've tried calling the dyno in Columbia, SC five times today (~50 minutes away). I've got 3900 miles and want to dyno it but seems as if there's Divine Intervention. I'll give them a call first thing in the morning. This shop has three runs and a wideband readout for $75.
