Lightning

belt install tools?

Thread Tools
 
Search this Thread
 
Old May 31, 2001 | 08:54 AM
  #1  
LIGHTNINROD's Avatar
Thread Starter
|
Senior Member
Joined: Apr 2001
Posts: 5,939
Likes: 0
From: Warner Robins, Ga, CSA
Post belt install tools?

bot a couple of wrenches at sears last sat. noticed something new (to me) in tools--two or three different "serpentine belt removal tools". all i used on my z281le was a 1/2" breaker-bar. what's needed on my 01L---i have a psp pulley on order.

------------------
2001 Lightning, silver, escort 8500, ranger 2950dx dual band radio, wilson 2000 ant., bot/picked up on 05/08/01, 1997 f150 xlt 4.6L 4x2 with: a/f one fipk, superchip, optima battery, bbk 75mm throttle body, edelbrock ias shocks--2001 lightning to come(she came--see above)
 
Reply
Old May 31, 2001 | 09:27 AM
  #2  
Silver-Bolt's Avatar
Senior Member
Joined: Dec 2000
Posts: 3,451
Likes: 0
From: Portland, Oregon. USA
Post

1/2" breaker bar. It will help if you have an extra set of hands. With the new pulley the belt is very tight to get back on. It fits, but it is tight.

------------------
2000 Silver Lightning 13.16 (so far)
PSP 4-way
PSP Filter Kit
PSP Lower Pulley
Level 10 Shift kit
F-250 Trans pan
MagnaFlow 12468
Snug-Lid

I feel a 12.xx coming on.

Team PSP West
 
Reply
Old May 31, 2001 | 10:10 AM
  #3  
LIGHTNINROD's Avatar
Thread Starter
|
Senior Member
Joined: Apr 2001
Posts: 5,939
Likes: 0
From: Warner Robins, Ga, CSA
Post

thanks silver-bolt: i think i'm going to install a slightly longer belt i saw mentioned in an earlier thread---napa store, gates belt no. K080670. dan
 
Reply




All times are GMT -4. The time now is 12:48 AM.