Can 5.4L underdrive pullies (crank, water pump, alternator) be used on our L's? Does anybody have them installed? I've had good results from them on other vehicles I've had, but haven't heard of anyone putting them on Lightnings.

------------------
2001 Black L
picked up 3/20/01
14% tint sides and rear
Line-X Bedliner
K&N, 26 X 10.5 M/T ET Streets and more to come
Best E.T.: 13.462 @102.30 (what's a G-tech?)
Best 60': 1.93

[This message has been edited by ASVTFordBoy (edited 05-07-2001).]

 

Anybody there?

------------------
2001 Black Lightning
picked up 3/20/01
14% tint sides and rear
Line-X Bedliner
K&N, 26 X 10.5 M/T ET Streets and more to come
Best E.T.: 13.462 @102.30 (actual time slip)
Best 60': 1.93

 

You really can't use the pulley set because the Lightning's blower pulley works off the balancer. If you go to a smaller balancer, then you can't use either the stock, or PSP lower pulley.

------------------
SAL - TEAM PSP
web- www.powersurgeperformance.net
E-mail sales@powersurgeperformance.net
tech@powersurgeperformance.net
F-150 Online Supporting Vendor

 

I think ATI is making balancers for fords with the serpintine pulley built right in. They are advertised for the 4.6. I think there are different sizes. Also I am not sure if it will fit the 5.4.
It might be worth a look.
Dale

 

Dale, all mod motors have the lower pulley and balancer as one unit. The available underdrive setups replace that. The problem is that these kits come with smaller crank setups, and then you can't attach the blower pulley to it.

------------------
SAL - TEAM PSP
web- www.powersurgeperformance.net
E-mail sales@powersurgeperformance.net
tech@powersurgeperformance.net
F-150 Online Supporting Vendor

 

Got it Thanks Sal!!