I just got back from having my truck aligned. While the truck was on the lift I noticed that the drive shaft has been hitting the bottom of my bed. There is about an inch shinny ring around the drive shaft and the bed at the contact area is also worn. I just got off the phone with Jim from JDM and he said that it was an issue with the lowered Lightnings only. So if your truck is stock hight you should be ok. I think every one should take a look just to be safe. I am putting my steel drive shaft back in until I get the JDM lift bars. The lift bars sound like they should really help out.

------------------
Bill
'00 white lightning-#2030 of 4966-4/6/00 thursday
muth mirrors,door key pad mod,fog light mod, Homelink remote
clear corners, super white; headlights,corners,fogs,
trenz billet upper and lower grills, billet 3rd brake light cover,
Bedrug, harley davidson tonneau cover,
JDM flip chip, JDM lower pulley, 90mm mass air, JDM tranny mod,
JDM 5"aluminum driveshaft,
J.L. stage 2 ram air kit
BellTech 3/4 lowering kit
2001 tails installed
20" chrome lightning wheels on order
more to come....
my zing albums-_-click here-_
'00 harley davidson FLSTC tons of custom parts..
'99.5 nissan pathfinder le-STILLEN EQUIPPED
'88 toyota show truck(TONKA)
'91 toyota mr2 turbo (to many mods to list)
'00 yamaha banshee(toomy race kit/chrome pipes)

 

What's a lift bar?

------------------
Airaid, PSP Pulley, Brembo's, Aluminum DS, 4:10's.

 

Bolt:
Like traction bars I guess, Plants the rear end.