CALLING hdmilliemum,DON C
I want to say it was awesome meeting you guys tonight.You are both very nice people.I was a little disapointed of my times but im hoping once JLs chip arrives tomorrow it will all come together 13.0 isnt great concidering my mods and 13.2s are worse .I think some of it was cause the track stunk and the other half because my strait pipes were not on.
Also I want to say helo to all the other l omnews that showed up who dont read this board incase they do because i told them about it.
VERY VERY nice people tonight who own lightnings!
** DON C, After taking the chip out i could have sworn your times wer 13.6?? Tell me how things went.I left disappointed. Ill be there next week LOADED with mods hope to run better times.
Also I want to say helo to all the other l omnews that showed up who dont read this board incase they do because i told them about it.
VERY VERY nice people tonight who own lightnings!

** DON C, After taking the chip out i could have sworn your times wer 13.6?? Tell me how things went.I left disappointed. Ill be there next week LOADED with mods hope to run better times.
One more thing DON,If you need help with your computer,I can clean them very well and even solder the little contacts like a PRO.Let me know if I can help,You were a very nice person and ill do anything I can to help.Your chip was definatly not working.There is no reason at all you should be running those times with a chip.Looks from your times that your truck will be very strong even without the chip once the track tightens up!! 13.8 with 2.3 60ft??? Wait till you get 1.98s,Youll be running low 13s stock!
Hey Lightningquick
Well I am back from the track. It was the first time I have ever ran a 1/4 mile track and I had a blast.
I met a bunch of nice guys, thanks for being so nice. As for my runs the first one I did a 14.329 @ 99.78mph and that was with the JDM chip I took out the chip and ran a 13.851 @ 100.52mph. ,then did a 13.90@ 100.34 also with out the chip. My last run I put the chip back in and did a 13.858 @102.93 mph.
My best 60" time was 2.221 I just couldn't get any traction off the line, but had a blast. Once I learn how to launch this baby I bet my times will improve. I noticed on the way home the truck felt a lot peppier than it did before so maybee I didn't clean the contacts good enough, I will reclean them tomorow and see if it helps.
But a 13.851 @ 100.52mph with a 60' time of 2.326 with no chip isn't to bad, and once I fix the nut that sits between the wheel and the seat maybee I can get some more respectable numbers
hdmilliemum was running 13.20's all night his truck is quick, But my last run I ran him and thought he would smoke me that was the run I did the 13.85 at 102.93 he lost traction big time and a kicked his butt, hehe
------------------
SILVER 2001 LIGHTNING
Built 02/14/01
Picked up 03/03/01
Sportmasters tonneau
Bedrug
Alpine head unit and six disk changer.
JL Audio speakers
Magnaflow muffler
JDM BigMouth Filter.
http://donf150.tripod.com/Welcome/id6.html
http://www.zing.com/album/?id=4294607313
Well I am back from the track. It was the first time I have ever ran a 1/4 mile track and I had a blast.
I met a bunch of nice guys, thanks for being so nice. As for my runs the first one I did a 14.329 @ 99.78mph and that was with the JDM chip I took out the chip and ran a 13.851 @ 100.52mph. ,then did a 13.90@ 100.34 also with out the chip. My last run I put the chip back in and did a 13.858 @102.93 mph.
My best 60" time was 2.221 I just couldn't get any traction off the line, but had a blast. Once I learn how to launch this baby I bet my times will improve. I noticed on the way home the truck felt a lot peppier than it did before so maybee I didn't clean the contacts good enough, I will reclean them tomorow and see if it helps.
But a 13.851 @ 100.52mph with a 60' time of 2.326 with no chip isn't to bad, and once I fix the nut that sits between the wheel and the seat maybee I can get some more respectable numbers
hdmilliemum was running 13.20's all night his truck is quick, But my last run I ran him and thought he would smoke me that was the run I did the 13.85 at 102.93 he lost traction big time and a kicked his butt, hehe
------------------
SILVER 2001 LIGHTNING
Built 02/14/01
Picked up 03/03/01
Sportmasters tonneau
Bedrug
Alpine head unit and six disk changer.
JL Audio speakers
Magnaflow muffler
JDM BigMouth Filter.
http://donf150.tripod.com/Welcome/id6.html
http://www.zing.com/album/?id=4294607313
Lightningquick:
I had a good time and it was great meeting you and the rest of the L owners. Don did beat my a$$ that last run but there will be a next time so look out Don, your going down.
Just kidding Don I race to have fun and I had a blast. I will talk to you guys later and see you at the track soon.
------------------
Bill
'00 white lightning-#2030 of 4966-4/6/00 thursday
muth mirrors,door key pad mod,fog light mod, Homelink remote
clear corners, super white; headlights,corners,fogs,
trenz billet upper and lower grills, billet 3rd brake light cover,
Bedrug, harley davidson tonneau cover,
JDM flip chip, JDM lower pulley, 90mm mass air, JDM tranny mod,
JDM 5"aluminum driveshaft,
J.L. stage 2 ram air kit
BellTech 3/4 lowering kit
2001 tails installed
20" chrome lightning wheels on order
more to come....
my zing albums-_-click here-_
'00 harley davidson FLSTC tons of custom parts..
'99.5 nissan pathfinder le-STILLEN EQUIPPED
'88 toyota show truck(TONKA)
'91 toyota mr2 turbo (to many mods to list)
'00 yamaha banshee(toomy race kit/chrome pipes)
I had a good time and it was great meeting you and the rest of the L owners. Don did beat my a$$ that last run but there will be a next time so look out Don, your going down.
Just kidding Don I race to have fun and I had a blast. I will talk to you guys later and see you at the track soon. ------------------
Bill
'00 white lightning-#2030 of 4966-4/6/00 thursday
muth mirrors,door key pad mod,fog light mod, Homelink remote
clear corners, super white; headlights,corners,fogs,
trenz billet upper and lower grills, billet 3rd brake light cover,
Bedrug, harley davidson tonneau cover,
JDM flip chip, JDM lower pulley, 90mm mass air, JDM tranny mod,
JDM 5"aluminum driveshaft,
J.L. stage 2 ram air kit
BellTech 3/4 lowering kit
2001 tails installed
20" chrome lightning wheels on order
more to come....
my zing albums-_-click here-_
'00 harley davidson FLSTC tons of custom parts..
'99.5 nissan pathfinder le-STILLEN EQUIPPED
'88 toyota show truck(TONKA)
'91 toyota mr2 turbo (to many mods to list)
'00 yamaha banshee(toomy race kit/chrome pipes)
Lightningquick
Thanks for the kind words, you and all the guys there were very nice to me. I am going to try to clean the contacts a little better today and see iff that helps, but I might take you up on your offer to solder the contacts.
hdmlnium thanks for the advice on how to launch. Once I get my chip working better, and with the other little mods I have planned we will see. It would be fun to run the whole way down the track neck and neck, both doing low 13's.
--------------------------------------------
[b]Update took the computer out today, I recleaned the contacts now it is definatly clean. Feals a little better now.We will se how it works next week. jim.b]
[This message has been edited by Don C (edited 04-26-2001).]
[This message has been edited by Don C (edited 04-26-2001).]
[This message has been edited by Don C (edited 04-26-2001).]
Thanks for the kind words, you and all the guys there were very nice to me. I am going to try to clean the contacts a little better today and see iff that helps, but I might take you up on your offer to solder the contacts.
hdmlnium thanks for the advice on how to launch. Once I get my chip working better, and with the other little mods I have planned we will see. It would be fun to run the whole way down the track neck and neck, both doing low 13's.
--------------------------------------------
[b]Update took the computer out today, I recleaned the contacts now it is definatly clean. Feals a little better now.We will se how it works next week. jim.b]
[This message has been edited by Don C (edited 04-26-2001).]
[This message has been edited by Don C (edited 04-26-2001).]
[This message has been edited by Don C (edited 04-26-2001).]


