Front bumper....
Thread Starter
|
Member
Joined: Mar 2001
Posts: 69
Likes: 0
From: Atlanta, GA USA
Mines a little lower on the passinger side too. Not enought to worry about though....
------------------
2001 White Lightning
Bought 3/18/01
Tinted Windows (35%)
DJM 2" Drop Shackles
Amp/Sub Woofer
Soft Tonneau Cover
------------------
2001 White Lightning
Bought 3/18/01
Tinted Windows (35%)
DJM 2" Drop Shackles
Amp/Sub Woofer
Soft Tonneau Cover
Senior Member
Joined: Oct 2000
Posts: 232
Likes: 0
From: TAMPA FL
PFA,
Mine was the same way and the dealer is full of BS. Crawl under the front and you'll find 4 large bolts that hold the whole bumper assembly on, just semi-loosen, adjust the whole bumper, and tighten. So easy the dealer should be shot for not knowing it. If you put a billet grill in later you will want to know this because dropping the front bumper will help at getting those little plastic push-pins out of the grill assembly in order to take it off.
It's things like this that keep me from taking my truck to the dealer.
Adam
01 Black L - Chipenfiltered, splitfired, billetted, and grooved thanks to Blaupunkt, Alpine, Sony, Clarion, Dynomat, and MTX
Mine was the same way and the dealer is full of BS. Crawl under the front and you'll find 4 large bolts that hold the whole bumper assembly on, just semi-loosen, adjust the whole bumper, and tighten. So easy the dealer should be shot for not knowing it. If you put a billet grill in later you will want to know this because dropping the front bumper will help at getting those little plastic push-pins out of the grill assembly in order to take it off.
It's things like this that keep me from taking my truck to the dealer.
Adam
01 Black L - Chipenfiltered, splitfired, billetted, and grooved thanks to Blaupunkt, Alpine, Sony, Clarion, Dynomat, and MTX
Senior Member
Joined: Feb 1999
Posts: 1,557
Likes: 0
From: Belleville, MI
Front bumper....
I know this is an old subject but, I am getting ready to pick up a new '01 L and the front bumper is lower on one side more than the other. The dealer is saying there is no real adjustment for this. Has anyone come to a conclusion of how to align it properly? I need to pass this on to the dealer to make them aware. I have already asked them to look again to make sure......
Thanks
Thanks
