After market transmission coolers ?
B&M made the one I used. They make several, rated by gross weight of the vehicle. I used the 28,000 GVW cooler (the largest available at the time) and it has worked great. Wasn't hard to install either.
------------------
The
<A HREF="http://www.haloclub.com" TARGET=_blank>
</A>
wyldman@houston.rr.com
Black 99.5 Lightning Build # 1273, DOB 5-14-99, NLOC #315
------------------
The
<A HREF="http://www.haloclub.com" TARGET=_blank>
</A>wyldman@houston.rr.com
Black 99.5 Lightning Build # 1273, DOB 5-14-99, NLOC #315
Before the next road racing event, I hope to add something to help cool down the transmission. Fluid came out of mine thru the overflow, but not as bad as Jeff's Lightning. Then again, he had the fastest time and toasted his brakes. See http://nloc.org/ubb/Forum2/HTML/001546.html . I should have taken photos of the fluid on the crossmember, etc.
------------------
Regards,
George
george@spikeengineering.com
http://www.spikeengineering.com
---------
Red 2000 Lightning, #4033
White 1996 Whippet (1/2 mile course, 6 turns: 40 Seconds)
Red Wheaton 1995 Ridgeback (1/2 loaf of bread, 6 bites, 4 seconds)
New addition:
2001 RR Puppy: 0 to stumble - next two months
[This message has been edited by Spike Engineering (edited 04-16-2001).]
------------------
Regards,
George
george@spikeengineering.com
http://www.spikeengineering.com
---------
Red 2000 Lightning, #4033
White 1996 Whippet (1/2 mile course, 6 turns: 40 Seconds)
Red Wheaton 1995 Ridgeback (1/2 loaf of bread, 6 bites, 4 seconds)
New addition:
2001 RR Puppy: 0 to stumble - next two months
[This message has been edited by Spike Engineering (edited 04-16-2001).]


