Lightning

Does anyone know an on-line source for 90mm mass-air?

Thread Tools
 
Search this Thread
 
Old Mar 26, 2001 | 06:52 PM
  #1  
OzFseries's Avatar
Thread Starter
|
Senior Member
Joined: May 2000
Posts: 151
Likes: 0
From: Austinmer,NSW
Question Does anyone know an on-line source for 90mm mass-air?

Now that these are available I am keen to source one. Can anyone tell me where I can buy one on the net.

Thanks,

Oz
 
Reply
Old Mar 27, 2001 | 10:26 AM
  #2  
Peter B's Avatar
Senior Member
Joined: Dec 1999
Posts: 997
Likes: 0
From: Phoenix, Arizona, USA
Post

Don't believe you can order online, but all it takes is a phone call to JDM Engineering. They have the complete setup--90mm MAF, boot, and clamps for $195.
732-780-0770
 
Reply
Old Mar 27, 2001 | 01:09 PM
  #3  
WA 2 FST's Avatar
Senior Member
Joined: Apr 2000
Posts: 1,173
Likes: 0
From: Allen, TX, USA
Post

But, what if you didn't buy your chip from JDM? Will they still reburn the chip for a small fee?

------------------
Wes Tarbox
90 LX 5.0 (10.69 @ 134.7)--597rwhp/590rwtq
96 Cobra (12.34 @ 115.8)--392rwhp/433rwtq
99 Lightning (13.20 @ 103.8)--364rwhp/447rwtq
00 Expedition XLT 5.4
http://hometown.aol.com/wa2fst/home.htm
 
Reply
Old Mar 27, 2001 | 01:35 PM
  #4  
LSchicago's Avatar
Senior Member
Joined: Jul 2000
Posts: 585
Likes: 0
From: Chicago, IL. USA
Post

As long as you have a Superchip, they will include it in the cost. If you have a different chip then you will need to contact your chip dealer. JDM only programs Superchips modules. Lloyd

------------------

2000 Black L Airaid & Superchip R9. Drag Results: Best ET: 13.07 Best MPH 103.09 Best R/T .501 (twice) Best 60' 1.631 on F1's. Mods to come: JDM 90MM MAF, JDM 2# lower pulley, JDM Oval TB, JDM Line mod valve, JDM Flip chip steet/race, PSP Electric fan kit, M/T ET streets, Drive shaft loop. I thought I could be happy with a chip & filter, but NO! 1973 Cutlass Supreme 455/450HP 4 speed. Too many Mods to list! 95 Olds Aurora 91 S10 305TPI/700r4 project 2000 freightliner FL60 Rollback tow truck My garage overuneth.
MODERATOR OR ROAD KILL AT www.svtperformance.com
 
Reply
Old Mar 27, 2001 | 06:35 PM
  #5  
OzFseries's Avatar
Thread Starter
|
Senior Member
Joined: May 2000
Posts: 151
Likes: 0
From: Austinmer,NSW
Talking

Thanks for the info all!

In the mean time I found a post from a week or so back by Johnny L saying he can supply them along with his new Diablosport chips. I subsequently spoke with him and he assures me it will be a kick-*** combo. he'll have the new program ready soon I'm told.

 
Reply
Old Mar 28, 2001 | 12:51 AM
  #6  
LSchicago's Avatar
Senior Member
Joined: Jul 2000
Posts: 585
Likes: 0
From: Chicago, IL. USA
Post

Also, you MUST have a chip programmed for the 90. If you don't it will run very lean! JDM includes a reburn with the 90 kit. Lloyd

------------------

2000 Black L Airaid & Superchip R9. Drag Results: Best ET: 13.07 Best MPH 103.09 Best R/T .501 (twice) Best 60' 1.631 on F1's. Mods to come: JDM 90MM MAF, JDM 2# lower pulley, JDM Oval TB, JDM Line mod valve, JDM Flip chip steet/race, PSP Electric fan kit, M/T ET streets, Drive shaft loop. I thought I could be happy with a chip & filter, but NO! 1973 Cutlass Supreme 455/450HP 4 speed. Too many Mods to list! 95 Olds Aurora 91 S10 305TPI/700r4 project 2000 freightliner FL60 Rollback tow truck My garage overuneth.
MODERATOR OR ROAD KILL AT www.svtperformance.com
 
Reply




All times are GMT -4. The time now is 01:50 PM.