Will this master Cylinder fit????
Thread Starter
|
Senior Member
Joined: Nov 2001
Posts: 6,166
Likes: 0
From: Burlington, Ma
Will this master Cylinder fit????
Yo
Looks like it is time to replace my master cylinder
I know I can just throw a new stock one back on, but then I saw this one
http://www.wilwood.com/Products/006-...IRMC/index.asp
http://www.wilwood.com/PDF/ds260.pdf
I haven't gone out and measured my stock one, so I am not even sure it is close.
Just curious if anyone has tried it, or knows of any better Master Cylinders that will fit our trucks
Looks like it is time to replace my master cylinder
I know I can just throw a new stock one back on, but then I saw this one
http://www.wilwood.com/Products/006-...IRMC/index.asp
http://www.wilwood.com/PDF/ds260.pdf
I haven't gone out and measured my stock one, so I am not even sure it is close.
Just curious if anyone has tried it, or knows of any better Master Cylinders that will fit our trucks
Thread Starter
|
Senior Member
Joined: Nov 2001
Posts: 6,166
Likes: 0
From: Burlington, Ma
Originally Posted by SWThomas
Interesting... What wrong with your stocker?
Thread Starter
|
Senior Member
Joined: Nov 2001
Posts: 6,166
Likes: 0
From: Burlington, Ma
Originally Posted by Hilander
Looks good.
How did you run at JDM day?
How did you run at JDM day?
The truck ran great, but the brakes wouldn't allow me to bring my revs up. Which is why I am looking to upgrade or at least fix my brakes
Senior Member
Joined: Nov 2000
Posts: 1,128
Likes: 0
From: New Mexico
Originally Posted by Don's Bolt
The truck ran great, but the brakes wouldn't allow me to bring my revs up. Which is why I am looking to upgrade or at least fix my brakes
I thought something was up when I saw you pushing through the beams at the start.
Senior Member
Joined: Feb 2000
Posts: 1,121
Likes: 0
From: RogersAr
thats a MOPAR master cyl. and that one is for manual brakes not power.Also there is no provition for the cruise switch so something there would need to be mads to work inline somewhere.sTan
Trending Topics
Senior Member
Joined: Feb 2007
Posts: 910
Likes: 0
From: Selden, NY
Originally Posted by Hilander
I thought something was up when I saw you pushing through the beams at the start.
UNTIL I changed the Master Cylinder
Old one and new box
AutoZone Reciept said
#718100 Master Cylinder $49.99
#718100 Core Charge $27.00
Yes it's a rebuilt Don, but it only takes like 10 minutes to do it and the price is right, and it works, give it a try.....
Sorry I missed your calls buddy (and more sorry I missed JDM day) @$@$@$