I need to know what it will take to install two stock fuel pumps in my F-150 Supercrew. I am doing an L motor swap and I am wanting to install the two stock pumps from the L. I didn't get the "pump basket" or assembly, just the two pumps. Any help would be appreciated. Thanks

Adolph

 

hose clamps

 

LOL, thanks built. Too funny, so do I just use a hose clamp to hold the two together and then use the stock Y fitting going to the outlet of my original pump setup? also, what about wiring for the two pumps as opposed to one? Thanks

 

yeah but make sure the pumps and the clamp are not touching any of the metal so they dont ground out... put rubber or something around the clamps. Im not sure on the wiring as I used 1 large pump

 

anyone know how to wire these pumps up to work on a regular F-150?

 

depends on if you want to run both at the same time or not, if so, jst wire them together...

 

thanks built, i think since its only two stock L pumps, then I'll wire them together to run both at the same time, I wouldn't think that should hurt anything, and in the future if and when I need to change them, I'll just replace with a single 255. Thanks