What is the dimensions on the cut out for the exhaust in the ground effects?
How far is the cut out from the rear wheel?
What is the diameter of the exhaust tips?


[This message has been edited by Ford Rules All (edited 02-25-2001).]

 

Yeah, anybody know the diameter of their exhaust tips. I ordered 2 new tips, I hope they are 3inch caue thats what im getting.

Ted (Lightning_R)

 

2 1/2"

I have heard guys changing to three to get a deeper, louder tone but lost back pressure which lost torque

------------------
Jim
Jim@FordMotor.cc

Black 00, #1008 of 4966, 4.10's, SuperChip/R9, JL’s Ram Air,
AIM 2" drop, AutoMeter Boost and A/F Gauges, chrome wheels,
Cobra Throttle Body, Mobile1 w/FilterMag
2000 E320, 1993 Cobra R, 1959 Corvette, 1949 Plymouth Coupe

 

btt
Help Please.

 

The tailpipes are 2.5", however the tips are 3". Just replaced mine with Stainless tips. The back part of the cutout is 2.5" forward of the wheel well and approximately 12" long.

[This message has been edited by '00BlackLightning (edited 03-02-2001).]

 

I just had a thought, buy the plastic piece and just that one peice that has the cut out for the exhaust. Then have your exhaust put in place and then when you have the money buy the other 7 pieces of the ground effects. This is the way that im going to do it. I also had an idea. It probably won't fly with most lightning owners but....Get one of you lightning friends to let you borrow just that one piece of ground effects and bolt it to you truck for the day. Have you exhaust bent to go out the hold and then put the ground effects piece back on the real lightning.

------------------
Ted (Lightning R)