Did one pull with neighbors L with the results: 328 hp and 420.8 Tq. This was done on a dynojet chasis dyno. Mods are airaid kit and R9 chip. No pulls w/o chip. Any feedback

 

Sorry, I posted the wrong numbers. These are the correct numbers: 346.1 hp and 410.2 TQ

 

My '00 Lighting with an R9 chip and the JL ram air kit with the Powerstack filter pulled 366.1 rwhp uncorrected and 350.8 corrected on a Dynojet dynometer. I also had my boost solenoid disconnected. Temp was in the high 40s and my truck had about 3,200 miles on it at the time. Assuming your 346.1 is the SAE corrected number, it sounds like we're in the same ballpark.

------------------
'00 Lightning - 13.110 @ 105.91
'92 Stealth Turbo - 13.4 @ 103
'99 Z28 - 13.7 @ 107
'01 Honda CR250

 

Last dyno results with the following mods. at the time HP chip, Fro-M/K&N, 3:73 gear.
369.9hp
445.0 torque

------------------
Mark S.
93L red 396 stroker
00L white Full Bassani, Pro-M air meter/ K&N,HP chip, 4:10 gear,FRP 80mm single bore T/B

 

Just ran my truck. Stock it was
314 hp 393 tq

I then put in Sal's chip which I had de-tuned for the texas winter gas.

358 hp / 422.6 tq

I cant wait for winter gas so I can go to a more aggressive tune. What a blast! All numbers are SAE corrected.

 

I had my 00' on Danny Swanson's dyno last Wed. We had some great weather and pulled 377 RWHP and 440 Lbs. torque from his latest calibrations. I only have two mods to the truck, a Pro-m mass air and a Seanson Perf. Chip. I'd like to run this thing at LACR and see what it will do.

------------------
Red 00"
Pro-M mass air
Swanson Chip
*******'s bed cover