I have recently installed the ASP blower pulley. I am getting some top end detonation real bad. 112 octane unleaded has helped but that does get expensive. I do have the PSP 2 way chip. Question would be, do I go with a reprogram or do I buy a new R9 custom chip??? Any help would be thankful. Try to include a name, number and cost. Christmas is coming up and I do not think that the wife will let me get this right now, but we'll see.
Thanks in advanced
CT

 

Just get your chip reprogrammed for the detonation.

------------------
Red '00 Lightning,
Power Surge Performance enhanced,
Sound effects provided by Flowmaster,
375 RWHP,
445 RWTQ,
13.227@103.55
Track Videos

 

Thanks 4DTHNDR
Now the question is how do I get in touch with Sal at PSP??? Or do I go with the new R9 with a custom program? Let me know.
Thanks again
CT

 

If you can live a few days without the chip just mail it back to him with an explanation of the problem. There might be a $10 reburn fee, not sure. Have seen it charged for program change but dunno if it is charged to correct a problem though.

------------------
Red '00 Lightning,
Power Surge Performance enhanced,
Sound effects provided by Flowmaster,
375 RWHP,
445 RWTQ,
13.227@103.55
Track Videos




[This message has been edited by 4D THNDR (edited 11-23-2000).]

 

If you cant find Sal on his site, I would try over at www.SVTPERFORMANCE.com, he's a member there

------------------
Spiro-"The Greek"
BLK. #1476

Best run to date
12.373 @110.15
Best 60` 1.76
@ 4800 lbs.
On Pump Fuel
_________________________
JDM Engineering- Ford Specialist
_________________________

Johnny Lightning Performance
http://www.webtechnik.com/johnnylightning

"Empty Pockets Racing"Drag Race Team NJ-DE
Spiro99SVT@aol.com
LAUNCH HARD !!!

 

Thanks guys, Sal did email me with an address and a $10 reburn charge. He said that he has a new program with more power. I will let you know how it turns out. My goal is to run 12's on on the F1's. WE WILL SEE!!!!
Much appreciated
CT

 

Frogman -
Can you elaborate on this pulley? Is it for the supercharger or the crank? I've heard of problems when trying to change the supercharger pulley. Any info would be appreciated.
Ryan460@mindspring.com
Thanks,
Ryan


------------------

• 2000 Red Lightning
• 13.13 @ 106.40 mph in 1/4 mile
• 8.50 @ 85.43 mph in 1/8 mile (same run)
• Superchip R9, Airaid box with S+B 10" filter
  

 

Ryan
It is the blower pulley!! Real easy to change with the right tools. Take the front cover off, put it in a press and then press the new pulley on. It is that easy. E-mail me with any questions.
frog351@hotmail.com
Thanks
CT