Carbon Fiber Dash Kit ordered from Joshua Wood Tree
http://www.woodtrim.com/catalog_detail.cfm?prod=2303








------------------
2000 Lightning - Red
Superchip CUX2R9
Airaid Filter
ARE II Hard Cover
2" Aim Drop Shackles
G-Tech
Dual 40 Series Flowmasters
Lightning Hitch Cover
Eaton Inside decal
Keyless Entry Keypad

2001 Lexus IS300


e-mail addr rhampton@mindspring.com

"He who dies with the most toys WINS"



[This message has been edited by ToyMan (edited 11-09-2000).]

 

Flat
Molded

 

MRBBQMAN
Are those part of the same kit or two different kits. Where did you get them from and how much? Webb site? Thanks.

 

2-different kits, the molded is from http://www.autodash.com/index.lasso 7pc set is 399.00
the flat kit is from Joshua Tree, link is above. the flat kit is more of a black on dark gray, the molded is a black on silver (platinum), i think they look good together, but that is an expensive thought

[This message has been edited by MRBBQMAN (edited 11-09-2000).]

 

Is the molded kit all new pieces or is it layed on. Thats one of the reasons I don't do the carbon fiber dashes. If I was to do it I would want all new pieces, not lay on.

------------------
99.5 red lightning
Cervini's ram air hood
billet grilles
clear coreners
clear tail's
A.R.E bed cover
SS street style mirror's
Super chip R9
airaid intake
trans go shift kit
Audio: Kenwood 9015 cd, Kenwood kmd minidisc, Kicker 5x7 impulse, kicker 5.25 resolution, phoenix gold zx450, Phoenix gold zx500, Three JL audio 10w3's, Qform's, custom built box.
Built 5/4/99 A tuesday
# 917 of 4000
Best ET. 13.42 at 100.98
best stock 13.96 at ?

When the green light drops, the bullsh*t stops.

 

I really like the look of it, but why does it cost so much!?!?!?! I was looking at the brushed alluminum style ones at Western Motorsports and I asked him how much they were, and I though I heard him say something like 320, and just assumed it was $3.20 per piece! Now I thinking maybe not! The pieces I was looking at were just rubbery plastic pieces that have a sticky adhesive on the back, to stick them on to the original part. Man are those ever expensive stickers!!

------------------
~'98 F-150 XLT Reg. Cab Flareside 4x4, Black, 5.4L, 3.55LS, tow package, 285/75/r16 Mud Terrain BFG's,K&N, GTS headlight covers, Alpine changer w/FM mod, Clifford alarm system w/keyless entry & starter disable // Future considerations: Bed mat, tonneau cover, 4" suspension lift or 3" body lift.

~'71 F-100 Sport Custom Reg.Cab
-390FE w/Edelbrock Performer RPM intake, 780cfm Holley, ported & polished cylinder heads,
Hydraulic Crane Cam, 10.5:1 CR, Black Jack headers, true double roller timing chain, and high volume oil pump
-C6 transmision w/B&M 2600rpm stall
-9" Ford Rearend w/4.10 Richmond Gears & 31 spline axles
-215/65/r15 Yokohama's for the front & 28"x13.5"x15" Mickey Thompson ET Street slicks for the back
Best 1/4 mile time @ 3500ft altitude 14.69secs @ 92mph

~2000 Suzuki RM125 Dirt Bike
-no need for any modifications! (yet)