Lightning

Paxton Novi tuning session

Thread Tools
 
Search this Thread
 
Old Sep 24, 2006 | 11:03 PM
  #1  
RDY2RAC's Avatar
Thread Starter
|
Senior Member
Joined: Feb 2001
Posts: 1,248
Likes: 0
From: MOTORCITY
Paxton Novi tuning session

some of you know about my project but here's a small list of stuff.

Paxton Novi 2000 race blower
custom fabbed intake
JLP shortblock
Fox Lake ported heads
Long tubes w/3 inch Mac pro-dumps
Crane Cams custom blower cams
60lb. injectors
CPR fuel rails, pump and fuel cell
Sniper 3000 mass air meter
NY-TREX nitrous system(yet to be used)




we maxed out the fuel pump right about 5500rpm's as you can see on the graph's. this was tuned using the Sniper Delta Force Tuning software. and the Sniper 3000 maf from Professional Mass Air Systems. i hope to have a second pump installed by the NMRA BG race next weekend.

btw the maf voltage was only at 4.2 volts at 5500rpm's/700hp.
 
Reply
Old Sep 24, 2006 | 11:12 PM
  #2  
LightningTuner's Avatar
Senior Member
Joined: Aug 1999
Posts: 5,438
Likes: 1
From: Palm Coast, FL
Nice job Robert .
 
Reply
Old Sep 25, 2006 | 09:19 AM
  #3  
Casey02L's Avatar
Senior Member
Joined: Sep 2003
Posts: 1,412
Likes: 0
From: Florida
Looks pretty good with the power climbing all the way! How much boost you seeing on that setup?
 
Reply
Old Sep 25, 2006 | 01:09 PM
  #4  
l-menace's Avatar
Senior Member
Joined: Jan 2003
Posts: 5,097
Likes: 0
From: DETROIT, (formerly Eaton County, Michigan)
I had the honor of hearing this beast in Person just last weekend. HOLY COW!

Remember, thos numbers are WITHOUT Nitrous. This thing is going to scream down the 1320.

Major props to Rob for helping me with a plug change and found my boost-loss issue.
 
Reply
Old Sep 25, 2006 | 04:54 PM
  #5  
RDY2RAC's Avatar
Thread Starter
|
Senior Member
Joined: Feb 2001
Posts: 1,248
Likes: 0
From: MOTORCITY
Originally Posted by Casey02L
Looks pretty good with the power climbing all the way! How much boost you seeing on that setup?
that was only 17-18 psi on the gauge
 
Reply
Old Sep 25, 2006 | 06:49 PM
  #6  
BDAZSVT's Avatar
Senior Member
Joined: Dec 2000
Posts: 1,018
Likes: 0
From: S. Indiana
I hope to see you and the truck in BG next weekend!
 
Reply
Old Sep 25, 2006 | 10:06 PM
  #7  
LatemodelRacer2's Avatar
Senior Member
Joined: Jan 2002
Posts: 3,709
Likes: 0
From: Jasper Alabama
great to see an update on the truck.
 
Reply

Trending Topics

Old Sep 25, 2006 | 10:34 PM
  #8  
RDY2RAC's Avatar
Thread Starter
|
Senior Member
Joined: Feb 2001
Posts: 1,248
Likes: 0
From: MOTORCITY


 
Reply
Old Sep 26, 2006 | 07:44 PM
  #9  
afchad's Avatar
Senior Member
Joined: Jan 2004
Posts: 902
Likes: 0
From: Tampa, FL

INSANE
 
Reply
Old Sep 27, 2006 | 12:28 AM
  #10  
JohnnyLightning's Avatar
Senior Member
Joined: Feb 2000
Posts: 2,141
Likes: 0
From: lancaster,pa. usa
YES! Now thats gettin it done!..Nice job robert we'll cya in a few!....JL
 
Reply
Old Sep 27, 2006 | 09:29 AM
  #11  
brahmus's Avatar
Senior Member
Joined: Oct 2003
Posts: 2,066
Likes: 0
From: Delcambre, La
What was the fuel pump rated at?
 
Reply
Old Sep 28, 2006 | 08:04 AM
  #12  
Virilha's Avatar
Senior Member
Joined: Sep 2006
Posts: 175
Likes: 0
From: newark,nj
Originally Posted by RDY2RAC
that was only 17-18 psi on the gauge
You gotta be kidding me. If this thing was at only 17-18 psi imagine the damage it will do with 23-25PSI !


What is the maximum PSI for this blowers ?
 
Reply
Old Sep 28, 2006 | 09:44 AM
  #13  
RDY2RAC's Avatar
Thread Starter
|
Senior Member
Joined: Feb 2001
Posts: 1,248
Likes: 0
From: MOTORCITY
Originally Posted by brahmus
What was the fuel pump rated at?
about 800hp at the crank. basically this but reworked to flow alittle better.http://www.capa.com.au/fuel_pumps.htm

Originally Posted by Virilha
You gotta be kidding me. If this thing was at only 17-18 psi imagine the damage it will do with 23-25PSI !


What is the maximum PSI for this blowers ?
this blower should push 1750 cfm or around 28-30 psi.
 
Reply
Old Sep 28, 2006 | 09:57 AM
  #14  
lurker's Avatar
Senior Member
Joined: Mar 2001
Posts: 830
Likes: 0
From: Plymouth, MI
Cool. When will you be RDY 2 RAC?
 
Reply
Old Sep 28, 2006 | 02:38 PM
  #15  
Virilha's Avatar
Senior Member
Joined: Sep 2006
Posts: 175
Likes: 0
From: newark,nj
Posted by RDY2RAC:

"this blower should push 1750 cfm or around 28-30 psi. "

Bye bye Whipple, bye bye Kenne Bell !
 

Last edited by Virilha; Sep 28, 2006 at 02:41 PM.
Reply



All times are GMT -4. The time now is 01:23 PM.