Is anyone running the Hoosier 28x11.5-16 Quick Time Pro on an 8" rim?

 

yes, quite a few people are

summit's catalog even suggests a 8" wheel for that tire

 

For the 16"? Jegs has it listed as a 10" for the 16, and an 8" for the 15. Just want to make sure I can run this tire on an 8" without problems.

 

http://store.summitracing.com/partde...5&autoview=sku


got a set of 16x8 weld pro stars sitting in front of me with those tires

 

Awesome, thanks!

 

Not to hijack but, I have a set of QTP mounted on Centerline hellcats sitting in my garage looking for a home. They have about 8 passes on them. I sold my 02

 

Are they the 28x11.5-16s on 16x8s? Can you e-mail me more info and maybe pics? powersurgeperf@aol.com

EDIT: Actually the rims are no good for me, this isn't for a Lightning. But I'd be interested in the tires maybe if you want to break them up.

 

Sal, I would not use those rims. I have the same exact tires and first installed them on 8" wide rims. The foot of the tire will bow up to the rim, and your burnouts will only show the middle of the tire getting any traction. I had to later go with 10" wide rims.

 

I have a pair of QTP's 28-11.5-16 mounted on AR Baja 16x10. 10 passes on them.

 

Yep those weld xps were mine... I ran those tires on them with no problems

 

Price? lprice536@adelphia.net

 

i agree, unless your psi is really really low, you'll wear out the centers and possibly have less traction. it's doable, but probably not advisable. those exact tires (i've been through 2 sets) have this crazy round roll to them. i wore out my centers even on the 10" rims but i run a lot of psi. now on MT ET streets (16x11.5x28) which seems to have a nicer tread contact patch @ 16lbs.