Tampa Bay Lightning where did you purchase
your Billet Steps for your Lightning Bed?
Did you notice after you installed your
Trenz Billet Grills your hood doesn't line
up properly when closed and there is a gap between the head lites and the frame of the grill? I'm having that problem!
Nice picture of your Red Lightning at the Beach!

Thanks in Advance, DJY

 

DJY:

Billet steps were purchased from Roger Lemere here at the F150Online Store. The set I bought was originally for his personal vehicle, but I bet he could hook you up with another. Are you going to have smooth steps make for them? I've got a guys name that makes them if you're interested.

The Trenz grill certainly makes the center of the hood close tighter than stock, but the headlights weren't affected at all. I actually never removed them during the install.


Good Luck!


------------------

Rich
1999.5 SVT Lightning - Red. Super Chip. K&N Filter. Viper Alarm w/remote start, Sir Michael's roll pan, smooth corners and steps w/billet inserts, clear corner lenses, tow package, cd changer, cover, Phantom boost gauge, MTX Thunderform w/ 2 10" MTX 200w. subs. 5-channel 500w. Clarion amp.(APA5241), (4)Polk Audio 3-way, 130w. DX 7's, Color-matched Muth signal mirrors, Soundproofed cab, BedRug, AIM 2" Drop, Trenz billet grills, etc. Build #2755
TampaSVT@Tampabay.rr.com

http://web.tampabay.rr.com/tampasvt/...Lightning9.jpg


1999.5 Expedition XLT
2001 PT Cruiser Limited on the way!!!

 

Rich, Thanks for the reply! What is the guys
name who makes Billet Step Inserts? How much did they cost you? I just purchased the same speakers and sub box from Crutchfield. Except
I'm getting 2 Sony amps 1-4x60 amp and 1-200x2 amp. My truck looks just like yours except it is Black and is going to be lowered with
the Bell Tech 3/4. How do you send pictures?
I have a Digital Camera and tried but the picture wouldn't paste to this site.
Thanks for all the advice! DJY

 

DJY:

Roger can be reached at Roger@f150online.com. Cost for the steps is about $100.00+, if I'm not mistaken.

Post your pictures to the internet(Zing.com, etc). Right click on the pictures, go to Properties, COPY the address.
When you post just include [img]PASTE[/img]
All there is to it.


Good luck with the mods.

Rich

 

Well that didn't work.

Try this (ignore the quotes) when you post include " [img]PASTE[/img] "

 

Rich, Thanks I'll try and use the Zing.com
later to send pictures! Thanks for the letting me know where to get the steps too!
DJY