Lightning

Got my 16 x 7 Expedition wheels and tried them on the L >>

Thread Tools
 
Search this Thread
 
Old Jun 20, 2000 | 09:34 PM
  #1  
BadBolt's Avatar
Thread Starter
|
Senior Member
Joined: Jun 2000
Posts: 857
Likes: 0
From: Downriver, Michigan
Post Got my 16 x 7 Expedition wheels and tried them on the L >>

Getting the SVT wheel off the pass rear was, to put it mildly, a total bi!ch; I sweat buckets kicking, pounding, bashing, trying to get that thing off the hub. Finally, it came off. I weigh about 235 and almost gave up; I can't imagine how a smaller guy or girl could ever do it. Anyhow, the wheels went right on with no slop, at all. VERY happy to have winter wheels for snowmobile towing. Going with the Bridgestone Winter Dueller. The stock L wheel hight is 28"; my buds 98 F-150 P255-70R-16 tires have a 29" ride height. Should I try to match my existing ride height of 28" or nor worry about 1" more ride height with the same tires as my buds. I know my speedo will be slower.
 
Reply
Old Jun 20, 2000 | 09:39 PM
  #2  
PFA's Avatar
PFA
Senior Member
Joined: Feb 1999
Posts: 1,557
Likes: 0
From: Belleville, MI
Post

Personally, for the short amount of time you'll have them on I wouldn't worry about it. I had 29" tires on for about 6,000 miles through last winter and had no problems at all.
 
Reply
Old Jun 20, 2000 | 10:23 PM
  #3  
noelvm's Avatar
Senior Member
Joined: Jan 2000
Posts: 2,328
Likes: 0
From: Houston, Tx, USA
Talking

The stock L wheel and tire height is 28.4 unless all your tread is gone.

GO HERE FOR GOODYEAR SPEC. http://www.goodyear.com/us/tires/tir...GF1GSSize.html
NOELVM




[This message has been edited by noelvm (edited 06-20-2000).]
 
Reply
Old Jun 20, 2000 | 10:37 PM
  #4  
BadBolt's Avatar
Thread Starter
|
Senior Member
Joined: Jun 2000
Posts: 857
Likes: 0
From: Downriver, Michigan
Talking

My height measurement was very unscientific. I just put a dowel rod on the top of the tire tread and used a tape measure and took a reading with the tire in the truck with the full weight on the wheel.
 
Reply
Old Jun 21, 2000 | 01:24 AM
  #5  
'00BlackLightning's Avatar
Senior Member
Joined: Jan 2000
Posts: 753
Likes: 0
From: TX
Post

A more accurate method is to measure the circumference of the tire and divide by pi (3.1416), and the result is the diameter of the tire.

------------------
2000 Black Lightning, Snuglid, Custom Bed Carpet, Clear Corners, Lightning banner, Tinted Windows
delivered Apr 6. NLOC #377


 
Reply
Old Jun 21, 2000 | 09:47 AM
  #6  
Franko's Avatar
Member
Joined: Feb 2000
Posts: 84
Likes: 0
From: Boston, MA, USA
Post

To approximate outside diameter:

(Tire size mm X Aspect ratio)X 2 / 25.4 + rim size inches= OD

ie a 275/.45 x18 tire/rim pack is 27.74" Dia



------------------
Franko

'00 Silver 'L
SST tonneau Cover
Ford aero hood shield
35% tint side glass
clear fog covers
100w Hella 9007's
55w halogen backup lights
Lund back draft spoiler(silver)
Ford tail gate protector
Rubbermaid bed mat
Hidden tailight mud flaps
Alarm w/surprise!
2 MacIntosh 2x100 amps w/Boston Accoustics 6.25 componets Front and 6.25 co-ax rear.
Ford cabin air filter
Ford cam kit w/lower weld
Dual Bullet SS mufflers
Folia Tec red calipers


Ford wheel locks (on order)Gorrilla's were a bust for MY'00


'00 MB E55 Bone stock 5.4 0-60 -13.3 1/4

'00 MB CLK430 cabriolet

Go slow if you must but life without thrust is a bust

 
Reply
Old Jun 21, 2000 | 02:52 PM
  #7  
redlite's Avatar
Senior Member
Joined: Jan 2000
Posts: 459
Likes: 0
From: Silver Spring, Maryland, USA
Post

TBLightning, I tried the same technique using snow instead of sand. However, by the time I think I found a stick of matching length, the snow melted. Perhaps I should try mud next. Or, maybe flour or bread crums. What would you recommend? I do live near a cow pasture and hog farm.
 
Reply
Old Jun 21, 2000 | 05:57 PM
  #8  
TampaBayLightning's Avatar
Senior Member
Joined: Nov 1999
Posts: 972
Likes: 0
From: Tampa, FL, USA
Post

You know, now that I think of it. You could probably find a piece of rope instead of a stick. You might even be able to cut it the right length. How's that for ingenuity...

That way the snow won't melt before you get back.

Try it and please let me know how it worked.
Take pictures if you can.

Rich
 
Reply
Old Jun 21, 2000 | 07:33 PM
  #9  
redlite's Avatar
Senior Member
Joined: Jan 2000
Posts: 459
Likes: 0
From: Silver Spring, Maryland, USA
Post

TBLightning, how thick should the rope be? And, should I use hemp, or nylon, or whatever? Any technical advice you can give would be greatly appreciated.

Speaking of hemp, where did I put my stash?
 
Reply
Old Jun 22, 2000 | 12:02 AM
  #10  
TampaBayLightning's Avatar
Senior Member
Joined: Nov 1999
Posts: 972
Likes: 0
From: Tampa, FL, USA
Post

I normally lay the tire down in the sand.
Then I take a stick and make a mark at the top of tire and then another one at the bottom of the tire.

Then I get a stick and lay it between the two marks(takes a while to find a stick the exact lenth).

Then I take my stick to a friend that has a tape measurer and he tells me how many inches it is. I normally have him write it down for me.

Hope this helps.....



------------------
Rich
1999.5 SVT Lightning - Red. Super Chip. K&N Filter. Viper Alarm w/remote start, Sir Michael's roll pan, smooth corners and steps w/billet inserts, clear corner lenses, tow package, cd changer, cover, Phantom boost gauge, MTX Thunderform w/ 2 10" MTX 200w. subs. 5-channel 500w. Clarion amp.(APA5241), (4)Polk Audio 3-way, 130w. DX 7's, Color-matched Muth signal mirrors, Soundproofed cab, BedRug, AIM 2" Drop, Trenz billet grills, etc. Build #2755
TampaSVT@Tampabay.rr.com

http://home.tampabay.rr.com/tampasvt...ing/Lightz.jpg


1999.5 Expedition XLT
2001 PT Cruiser Limited on the way!!!

 
Reply




All times are GMT -4. The time now is 02:52 PM.