help installing bed extender
#1
#2
#5
I took a few pictures with measurements and without.
I'll upload them in a minute
I put the tape measure in the corner of the bed for the height measurements, NOT THE BED LINER!
I installed the main bolt first, then put the bed extender on, and makred the hole where the "lock, stopper, pluger" whatever you call it goes, and drill it out. Then I put some anti-rust stuff on the holes.
I'll upload them in a minute
I put the tape measure in the corner of the bed for the height measurements, NOT THE BED LINER!
I installed the main bolt first, then put the bed extender on, and makred the hole where the "lock, stopper, pluger" whatever you call it goes, and drill it out. Then I put some anti-rust stuff on the holes.
Last edited by l-menace; 07-09-2006 at 04:51 PM.
#6
https://www.f150online.com/galleries...003-163506.jpg
https://www.f150online.com/galleries...003-163508.jpg
https://www.f150online.com/galleries...003-163509.jpg
https://www.f150online.com/galleries...003-163510.jpg
https://www.f150online.com/galleries...003-163511.jpg
https://www.f150online.com/galleries...003-163512.jpg
https://www.f150online.com/galleries...003-163513.jpg
https://www.f150online.com/galleries...003-163514.jpg
https://www.f150online.com/galleries...003-163515.jpg
https://www.f150online.com/galleries...003-163516.jpg
https://www.f150online.com/galleries...003-163517.jpg
https://www.f150online.com/galleries...003-163518.jpg
https://www.f150online.com/galleries...003-163519.jpg
https://www.f150online.com/galleries...003-163520.jpg
Let me know if you need more measurements. Getting themain support bolt lined up isn't that important, you'll have the rough measurements.
For the top hole, I wanted the bed extender to have some pressure on the tailgate when it was open to prevent it from bouncing. The rubber snubbers on the extender are actually a little compressed against the tailgate when it's open.
I have a spoiler on my truck (cervani) and I didn't want the tailgate to move at all when it was open.
https://www.f150online.com/galleries...003-163508.jpg
https://www.f150online.com/galleries...003-163509.jpg
https://www.f150online.com/galleries...003-163510.jpg
https://www.f150online.com/galleries...003-163511.jpg
https://www.f150online.com/galleries...003-163512.jpg
https://www.f150online.com/galleries...003-163513.jpg
https://www.f150online.com/galleries...003-163514.jpg
https://www.f150online.com/galleries...003-163515.jpg
https://www.f150online.com/galleries...003-163516.jpg
https://www.f150online.com/galleries...003-163517.jpg
https://www.f150online.com/galleries...003-163518.jpg
https://www.f150online.com/galleries...003-163519.jpg
https://www.f150online.com/galleries...003-163520.jpg
Let me know if you need more measurements. Getting themain support bolt lined up isn't that important, you'll have the rough measurements.
For the top hole, I wanted the bed extender to have some pressure on the tailgate when it was open to prevent it from bouncing. The rubber snubbers on the extender are actually a little compressed against the tailgate when it's open.
I have a spoiler on my truck (cervani) and I didn't want the tailgate to move at all when it was open.
Last edited by l-menace; 07-09-2006 at 04:58 PM.