Help lightning friends is this high enough to cause surge at high speeds idles just fine. I thought 1.02 reading on my volt meter might be a little high on my throttle position sensor just slight surge at high speeds plugs and injectors are ok thanks

 

It should read less than but as close to 1.0 as possible.

David

 

Throttle position sensor was set at .954 before i reset .983 would .954 affect or cause surge ????? thanks for you input

 

1.02 is fine at idle for a Gen 2.

 

I stand corrected. I was going by an old post by Clonetek: https://www.f150online.com/forums/sh...ht=TPS+voltage

David