Rivercity Raceway
Thread Starter
|
Senior Member
Joined: Nov 1999
Posts: 665
Likes: 0
From: Houston, Tx
Rivercity Raceway
Who's up for Rivercity Raceway this Friday, April 7th. The track is located in Seguin, Tx. I am going to be in Austin this weekend and have been wanting to take my truck to a 1/4 mile track. I plan on getting there about 7:00pm. Got any takers?
------------------
Jerrod
99.5 White Lightning
Snuglid, sprayed on bed liner, phantom boost gauge
1987 White Mustang GT (waiting for heart transplant)
HALO member
------------------
Jerrod
99.5 White Lightning
Snuglid, sprayed on bed liner, phantom boost gauge
1987 White Mustang GT (waiting for heart transplant)
HALO member
Thread Starter
|
Senior Member
Joined: Nov 1999
Posts: 665
Likes: 0
From: Houston, Tx
Come on, I know there are more L's in the San Antonio/Austin area on this board. Get you butts moving and lets get a good group at the track.
Trending Topics
Senior Member
Joined: Nov 1999
Posts: 1,566
Likes: 0
From: Olympus
I just wanted to say how much I enjoyed the fellowship with Jerrod, Travis, Nathan, Chuck, and Tommy Fri. night. It would have been more fun if my truck had been the fastest...but what the hey it was close. The conditions could not have been worse (hot, humid, and low pressure). And last but not least; Nathan I don't know if the young lady with you was your wife, girlfriend, or sister but she is quite nice and very easy on the eyes!!!
Jerry
Jerry
Senior Member
Joined: Nov 1999
Posts: 1,566
Likes: 0
From: Olympus
Caka, now that the air is cool and dry, is your truck pinging? Mine would not ping Fri. night no matter what I did. But Sat. morning with the dry air and high pressure it will ping from about half, all the way through full throttle. When the RPM's get high, it quits. Let me know, maybe we can get with Sal together on this!
Jerry
Jerry
Senior Member
Joined: Jan 2000
Posts: 673
Likes: 0
From: Austin Tx
Jerry,
I guess you didnt see my post (how long before....), but it was pinging like a big dog all the next day. I dont know if it was the weather or bad gas. But I do think we need to come off on the timing a little. At about 2:00AM on my drive home from from a wedding and after a fill up at Exxon my pinging stopped almost completly. Only in overdrive when I would easy into it would start doing it a little. But before,it would do it from 1/4 to full throttle and continued till I let off. I am gonna e-mail Sal to see what he says but my (uneducated) opinion is that maby with the climate here in Texas or chips should be set a little different. But I am far from "knowledgeable" in reguard to these things. I will say this, I am very impressed with the chip. And I had a good time also, maby we can do this agian soon. But I feel bad for Nathan and hope he gets his truck running back up to par. And I cant forget about Jerrod, I am sorry to hear about the pulley. Keep us posted on the progress of the removal. Later!
I guess you didnt see my post (how long before....), but it was pinging like a big dog all the next day. I dont know if it was the weather or bad gas. But I do think we need to come off on the timing a little. At about 2:00AM on my drive home from from a wedding and after a fill up at Exxon my pinging stopped almost completly. Only in overdrive when I would easy into it would start doing it a little. But before,it would do it from 1/4 to full throttle and continued till I let off. I am gonna e-mail Sal to see what he says but my (uneducated) opinion is that maby with the climate here in Texas or chips should be set a little different. But I am far from "knowledgeable" in reguard to these things. I will say this, I am very impressed with the chip. And I had a good time also, maby we can do this agian soon. But I feel bad for Nathan and hope he gets his truck running back up to par. And I cant forget about Jerrod, I am sorry to hear about the pulley. Keep us posted on the progress of the removal. Later!
