Edelbrock Muffler-Retraction!
OK, I'm convinced that some of you were able to do it! 1BADTK's pictures are convincing.
Part of the problem may have been that the lift that my guy used was a frame lift with arms that had to be placed near the exit pipes up to the arch in the chassis over the rear wheels.
Another part of the problem is, looking from the back of the truck,
the stock inlets go in like this: (/)
and the stock outlets go out like this: (\)
It takes some work, but obviously it can be done.
My apologies to all Edelbrock fans!
Boy, you sure get the straight scoop in a hurry on this board!
adp
[This message has been edited by adp (edited 04-06-2000).]
Part of the problem may have been that the lift that my guy used was a frame lift with arms that had to be placed near the exit pipes up to the arch in the chassis over the rear wheels.
Another part of the problem is, looking from the back of the truck,
the stock inlets go in like this: (/)
and the stock outlets go out like this: (\)
It takes some work, but obviously it can be done.
My apologies to all Edelbrock fans!
Boy, you sure get the straight scoop in a hurry on this board!
adp
[This message has been edited by adp (edited 04-06-2000).]
adp
Thanks, integrity still means something in this world, and yours is in tack. Your one I would count on in a pinch.
"I needed to say that."
------------------
HALO Member
051199-1132
Red Is Quick: 12.97 @ 107.5
"Only Little Boys Wear Bow Ties"
"The Surgeon General Gave No Warning Against Smoking The Competition"
Thanks, integrity still means something in this world, and yours is in tack. Your one I would count on in a pinch.

"I needed to say that."
------------------
HALO Member
051199-1132
Red Is Quick: 12.97 @ 107.5
"Only Little Boys Wear Bow Ties"
"The Surgeon General Gave No Warning Against Smoking The Competition"


