Finally got a chance to do some datalogging. My maximum MAF AD count is 1004. I read that you can calculate volts by multiplying .00488 x MAF AD count or by dividing MAF AD count by 205. Multiplying x .00488 puts me at 4.899 volts and dividing by 205 puts me over 5.0 volts. I searched a while and didn't find the correct formula. Which one is correct? I never thought I would be this close to pegging the MAF with just a 4lber but after much reading it appears that it's not all that uncommon.

Thanks,
Todd

 

1024 counts = 5 volts

 

I don't know what the heck I did wrong but they both calculate out the same. Must be that redneck math. :o Looks like I'm close to pegging out the MAF not pegged. Thanks rmfreeze!

 

1023 a/d counts = 4.99v

a/d count x .00488 = v
v x 205 = counts

 

How is your Icee Chiller System ?

 

Still chillin! I attempted to do some datalogging but for some reason the data doesn't download into LL from the XCal 2. The XCal 2 only datalogs 90 seconds of data so I'm considering buying a laptop to do the datalogging.

So no results to share as of yet but when the summer months arrive, I will get some and post it up.

By the way, that it one sharp truck you have there. Looks like it's gonna be a monster when get the Whipple and other goodies installed.

 

Thanks, dude.