Update Jlp R System!
Thread Starter
|
Senior Member
Joined: Feb 2000
Posts: 2,141
Likes: 0
From: lancaster,pa. usa
Update Jlp R System!
Here's a few shots of the proto-type, Keep in mind this is a rough version. once everything is fitted properly then bassani will go ahead and make the final system with the Well Known [B]Bassani Qaulity!]/B]....Keep in mind this is the 1st ever 1 5/8 to 1 3/4 EQUAL LENGTH LTH for the Gen 2 Lightning! Others have been made,but never in the Equal Length tubes! This is a Vital Part in this System Along with certain length tubes! and special 3" collecters!This system will Not only produce High RPM HP! But will more importantly make Tremendous amounts of Low End Torque!.We'll keep everyone updated on how the install goes.. 
JL
JL
Last edited by JohnnyLightning; Nov 23, 2005 at 10:03 PM.
Senior Member
Joined: Jan 2004
Posts: 198
Likes: 0
Hopefully they will offer optional not cat sections that can be substituted for the cats. Also having run three different types of 2x2 mufflers, hate seeing them used on this system as an alternative to an x or H pipe. Other than that, it is exactly what i want.
Senior Member
Joined: Oct 2002
Posts: 209
Likes: 0
From: arizona
Trending Topics
Senior Member
Joined: Oct 2004
Posts: 707
Likes: 0
From: Gainesville, FL.
Johnny,
when you talk about low-end torque gains, are we talking strictly for ported/machined head built blocks with 500+ HP, or will your mildly modded (4#er etc) truck see some decent gains? I'm loving it so far! More details!
when you talk about low-end torque gains, are we talking strictly for ported/machined head built blocks with 500+ HP, or will your mildly modded (4#er etc) truck see some decent gains? I'm loving it so far! More details!
Senior Member
Joined: Feb 2001
Posts: 1,248
Likes: 0
From: MOTORCITY
Originally Posted by l-menace
JLP.
Will you be able to run this exhaust and do some real world testing before you switch over to your TT Project?
Will you be able to run this exhaust and do some real world testing before you switch over to your TT Project?
this is going on one of his customers truck and not his own. so there should be lots of r&d to be had.
