Into the 11's!
Thread Starter
|
Senior Member
Joined: Sep 2001
Posts: 1,433
Likes: 3
From: cincinnati, ohio
Into the 11's!
i am more than pleased with my MD tune,
the truck ran an 11.97 on friday, the air wasn't horrible, but far from my 11.91 air in my old truck, it was -1000 feet when i ran it.
i think it was around 1900 feet on my 11.97, i would bet money on 11.7's this fall
the biggest thing is the safe tune on the truck, 11.5 a/f and 15-16 degrees timing if fully cool. i'm very pleased with md's work on the truck, this is using MD/Apen's new ported blower as well, got the truck traks on the back, but the suspension is stock other than that, the truck has already 60' .69's too, i'm thinking .65's in the cold air and 11.70's for sure
and a couple pics of pics, lol
the truck ran an 11.97 on friday, the air wasn't horrible, but far from my 11.91 air in my old truck, it was -1000 feet when i ran it.
i think it was around 1900 feet on my 11.97, i would bet money on 11.7's this fall
the biggest thing is the safe tune on the truck, 11.5 a/f and 15-16 degrees timing if fully cool. i'm very pleased with md's work on the truck, this is using MD/Apen's new ported blower as well, got the truck traks on the back, but the suspension is stock other than that, the truck has already 60' .69's too, i'm thinking .65's in the cold air and 11.70's for sure
and a couple pics of pics, lol
Last edited by beefcake; Oct 3, 2005 at 03:34 PM.
Thread Starter
|
Senior Member
Joined: Sep 2001
Posts: 1,433
Likes: 3
From: cincinnati, ohio
Trending Topics
Thread Starter
|
Senior Member
Joined: Sep 2001
Posts: 1,433
Likes: 3
From: cincinnati, ohio
md motorsports in cincinnati, 513-554-1777
ken does most of the tuning, they do a great job, gave me a very safe tune, per my request, a lot of people get hung up in dyno #'s, i just want the truck to live, especially when your pushing it.
they also own apten performance and have another building next door where they do all the port work on the eatons and such.
they did the cam install on my 04 cobra and did a great job on it as well, i have nothing but great things to say about them, they always go out of there way to make sure everything is done right.
here is a copy of my dyno off and on the nitrous, check out that a/f
ken does most of the tuning, they do a great job, gave me a very safe tune, per my request, a lot of people get hung up in dyno #'s, i just want the truck to live, especially when your pushing it.
they also own apten performance and have another building next door where they do all the port work on the eatons and such.
they did the cam install on my 04 cobra and did a great job on it as well, i have nothing but great things to say about them, they always go out of there way to make sure everything is done right.
here is a copy of my dyno off and on the nitrous, check out that a/f
Senior Member
Joined: Mar 2001
Posts: 1,352
Likes: 0
From: CORAL SPRINGS, FL. USA
Impressive....most impressive. Great power along with super-safe A/F's. How can you beat that.Is this without spray?? if so I would love to know your mods. Tip of the hat to you, sir !! 
Senior Member
Joined: Jun 2005
Posts: 206
Likes: 0
From: New Jersey
Originally Posted by beefcake
the dyno is with and without the 50 shot
truck was about 150-155 degrees starting the nitrous pull, the other pull is without the 50 shot,
md uses sct software
truck was about 150-155 degrees starting the nitrous pull, the other pull is without the 50 shot,
md uses sct software
