I'm replacing my blower with a new stiege ported and polished blower and having it installed in my home town. What gaskets will I need and what are the part #'s. Please help as the search doesn't cover this.

thanks

 

Most people say you can reuse your old gaskets.Here are part numbers for a 2000 should be the same for a 99.
XL3Z9H486AA INTAKE MANIFOLD
XL3Z9M436AA INTERCOOLER GASKET
XL3Z9461AA MANIFOLD
These were the descriptions and numbers I gort at my dealership. The 3 gaskets are one between the blower and upper intake one between the upper and lower intake and one that goes between the intercooler and upper intake. You wont need one of them if you dont seperate the intake. I got all 3 part#'s so I could clean the intercooler.

 

when i pulled my blower and intercooler, the gaskets had pretty good grooves in them so I elected to replace them. I called the dealer and after 15 minutes on the phone trying to explain to them what a Lightning was and yes there is a supercharger on the 5.4 on the svt.........I gave up and just had JDM send them to me. Turns out their price was cheaper then the dealer when I called to get a price of what I would have paid.

 

All gaskets reused on my mine. And...you CAN'T go wrong with the Steig ported/polished blower. I love mine

 

Reuse them all as long as they do not get damaged during removal:

http://www.azloc.com/forum/viewthread.php?tid=774

 

I liked my Steiggy but it doesn't compare to my Kenne Bell!