The truck is a little tight still as I only have about 200 miles on it, but it still did decent. It made 584hp and 688lb ft. This was with a 10# lower and a 2.8 upper (thanks Ramair) and I was seeing 19#'s of boost on the dyno. The std Numbers were 600.5hp and 706.9 ft lbs. With a little more break in and a couple more #'s of boost i should be in the 625-650hp range. It feels good. Steen and Ed definately took care of me. Here's the vid. I kinda jumped a little when It kicked down. HaHaHa
http://www.we-todd-did-racing.com/we...EzZGZkMzF5NTQx

 

nice numbers! built motor? heads/cams? what blower are you running?

 

niiiiiiiiiiiiiiiiiiiiiiiiiiiiiice 2b,
Dam thats got to be A LOT of fun on the street,

CONGRATS AND BEST OF LUCK

 

Very nice....

You coming up anytime soon or waiting for MIR?

 

Nice numbers....Your spinning that KB pretty good with a 10 lower and a 2.8 upper... Do you know the diameter of that 10lb?

 

wkuper11
Yes I just put the built motor in. It's a Fox lake longblock with their cams ( haven't gotten the spec sheet yet) and a KB.
Thanks Rob, it definately makes you pay attention a little more now.

Iculokn
I need to check Richmonds schedule for the weekend. If they are having the normal brackets on Saturday I will probably be there to see how quick they kick me off.

Jeff
I was actually expecting a little more boost with this pulley combo, but I guess it just means my heads are flowing pretty well. My 10# lower has a lip on the edges and from lip to lip it measures 10.25". i measured a JLP 10# lower with no lip and it was 10" even.

Thanks guys

 

I am seeing how many boards I can say nice numbers Shane.

 

Looks like the foxlake is doing a good job,....was those #s on 93 pump gas..?
Later Bob,... you got what stage 3 crower cams....

 

Richmond is open Friday night not Sat or Sun this week.

Dinwiddie has a big race that will be packed.

Next weekend would be better for playing unless you come Friday night.

 

I don't want to waste my time with the Friday night prep. I will be in Columbus racing NMRA next weekend so we will see.

 

Fox Lake is using Bullet cams or something. I can't remeber right now. The numbers I stated was my race gas tune. The street tune was around 540.