Navigation Wiring
Thread Starter
|
Member
Joined: Nov 2004
Posts: 46
Likes: 0
From: Tampa,FL
Navigation Wiring
Im going to install a navagation system I got(Kenwood KNA-DV2100) to my existing Kenwood KVT-911 TV, but there are a couple of wires im not 100% sure on where the correct harnesses are and what the correct wire color is to tap in and make connection, the list is as follows:
A reverse detection wire = to the reverse lamp harness of car
A Car speed signal intermediate wire = to the car speed siganl harness
And what are the TEL mute and Automatic Illumination For, Because they are not required
TIA
A reverse detection wire = to the reverse lamp harness of car
A Car speed signal intermediate wire = to the car speed siganl harness
And what are the TEL mute and Automatic Illumination For, Because they are not required
TIA
Senior Member
Joined: Jun 2003
Posts: 990
Likes: 0
From: houston, tx
tel mute is to mute the stereo when the phone rings if you have a phone installed in the vehicle. the auto illumination you will want to hook up. there is one in the radio wiring harness. it is to dim the screen at night.