ITS ALIVE!!!!! and its DEAD!!!!! well finally got everything together and fired it up started right up stumbled a little and then it ran smooth. checked all the fluids everything was in check no leaks all looks good. time for the test ride. start backing up and there is a lake of oil with a trail following me. now I'm getting a little pissed so I crawled under there and found it was leaking from around the oil pressure sender no big deal I pulled it out resealed it and reinstalled it started it up and checked again pissing out all over. turned out where the oil pressure sender screws into the adapter on the block is cracked. now I have to take damn near the whole thing apart again to replace it. o well its been sitting for 9 months what another day. I'm going to go see if I can get it done.

Victor

 

Sorry to hear about your problems man...

Is it the adapter or engine block that is cracked?

 

its the adapter that runs back to the oil cooler and filter. it turns out its a real pita to get this thing out still trying. looks like im going to have to remove the headers

back to work for now

Victor

 

hey, is that the magnum powers idler bracket on there? your kb looks NICE

 

I have a spare if you need?

jgonza94@ford.com

God Bless,

Suavy

 

thanks Suavy but i got one i had to drive down to maryland to get it but i finished everthing up friday night at about 10pm and made the trip back and fourth to the shore. got a whole 300 miles on it now.

Victor

 

yes its the MP bracket its a nice piece. as for the KB i really wanted to paint it black but it didnt show up till late thursday afternoon and i was way to anxious. i guess ill paint it in the off season.

Victor

 

Truely my honor to be of service!

God Bless,

Suavy