upper pulley?
Thread Starter
|
Senior Member
Joined: Feb 2003
Posts: 121
Likes: 0
From: selden n.y.
upper pulley?
99 eaton , looking to put on 2.7 upper does anyone have this setup on there 99 if so were did you get it and how much and does it fit on the stock shaft with out machineing 
Senior Member
Joined: Mar 2002
Posts: 11,153
Likes: 0
From: Selden NY
JLP has the only one (I know of) that goes right on with NO modifications
Just did in on mine, as easy as
$175.00 WITH THE PULLER TOOL
http://www.johnnylightningperf.com/s...?products_id=6
$75.00 for Pulley only (if you have a puller tool)
http://www.johnnylightningperf.com/s...products_id=77
Just did in on mine, as easy as
Originally Posted by Rob_02Lightning
Don't get much easier than this
1
2
3
(interesting pic, the truck was running and you can actually read the 2.7 ; o )
Finally a 2.7 Eaton upper (without any modification needed to the Eaton) WOO HOO...
Great Pulley and Puller, THANK YOU Johnny and Sue, (Huge Thumbs Up)
1
2
3
(interesting pic, the truck was running and you can actually read the 2.7 ; o )
Finally a 2.7 Eaton upper (without any modification needed to the Eaton) WOO HOO...
Great Pulley and Puller, THANK YOU Johnny and Sue, (Huge Thumbs Up)
http://www.johnnylightningperf.com/s...?products_id=6
$75.00 for Pulley only (if you have a puller tool)
http://www.johnnylightningperf.com/s...products_id=77
Senior Member
Joined: Apr 2000
Posts: 4,402
Likes: 0
From: On the side of the Road attempting to explain 135 miles per hour
HOLY BELT clearance Rob!!
If using the stock idler locations, yes.
Originally Posted by svtlover
will you need a shorter belt with a 2.7?
