Hey guys!
Just thought I'd post up a few pics of the Magnaflow tips I had welded up a few weeks ago. They're of the 3.5" diameter variety and don't have much of a slash cut, but just barely enough of one to notice. Sorry for the crappy pics.....

 

 

Looks good... After the summer I'll probably be selling or giving away my catback

 

i know a hooptie project that is looking for donor parts

 

2 ?s for you. because I hate my borla tips

1. How much and where to get them?
2. How do they sound over the regular tips?

 

1. The tips were $35 each from my local auto repair store. The tips measure:
3.5" in diameter
12" long
I posted a few weeks ago the part number, can't find it now. Any Magnaflow dealer should be able to get them for you, just give them the measurements I listed above. I originally bought a set of tips from Tim @ Chikenear's, but they were too long (18") to fit properly on the L's. I gave Tim the part number and I think he's gonna start carrying them on his website, www.chickenears.com.

2. No sound difference over the stock tips. I just wanted something that looked better than the stock tips, as I could not get them to stay clean.

 

They look good ... but I'm guessing the slight slash cut to them is originally meant to be turned 90* clockwise to allow the drain holes to be on the bottom...

 

Yeah, you're right, the holes are supposed to be on the bottom. But, the tips are universal so we had to turn them on the L to get them to look right.