Lightning

Snow Performance!

Old Jun 14, 2005 | 01:01 PM
  #1  
MaxPower's Avatar
Thread Starter
|
Senior Member
Joined: May 2001
Posts: 1,327
Likes: 0
From: STL
Snow Performance!

Ordering my kit tomorrow


Going with the Stage 2 setup - MAF controlled. Should be an interesting setup!!

Stiegemeier is going to be doing the testing and tuning on the truck - we'll be posting results as we move along. With the summer here, and loss of performance due to heat, we should see some positive results from the setup - ESPECIALLY in terms of the cooling effect it will have!

I'll post lots of updates throughout the process and get lots of pics of the installs.

If anyone has pics of their own installs, post 'em up! I'd like to get some ideas of how you've done it.
 
Reply
Old Jun 14, 2005 | 03:20 PM
  #2  
NTIMD8's Avatar
Senior Member
Joined: Sep 2002
Posts: 1,366
Likes: 0
From: Ottawa, Canada
This is something I have been thinking about getting. I wil keep an eye out for your updates.
 
Reply
Old Jun 14, 2005 | 03:45 PM
  #3  
johnathanh's Avatar
Senior Member
Joined: Sep 2003
Posts: 579
Likes: 0
From: Aruba
I've ordered mine too,whoohoo can't wait to get to aruba and install it

Mine is MAF controled too

Great whooohoo


Johnathan
 
Reply
Old Jun 14, 2005 | 04:39 PM
  #4  
wkuper11's Avatar
Senior Member
Joined: Jul 2002
Posts: 845
Likes: 0
From: ct
looking forward to hearing updates guys
 
Reply
Old Jun 14, 2005 | 06:40 PM
  #5  
Falcon11's Avatar
Senior Member
Joined: May 2002
Posts: 926
Likes: 0
From: Los Angeles, CA
Where did u order it from?
 
Reply
Old Jun 14, 2005 | 08:55 PM
  #6  
johnathanh's Avatar
Senior Member
Joined: Sep 2003
Posts: 579
Likes: 0
From: Aruba
Originally Posted by Falcon11
Where did u order it from?
Hi buddy

I've ordered mine from REM http://www.razorsedgemotorsports.com/ The part number is here :Water/Alcohol Injection Kit

And from the site snow performance : www.snowperformance.net
Part number is :Boost Cooler® Stage-2 MAF

I advise you to buy stage 2 and with the MAF controler

both kits from both site are the same (snow performance) Both $399

Johnathan
 
Reply
Old Jun 14, 2005 | 09:16 PM
  #7  
camcojb's Avatar
Senior Member
Joined: Feb 2003
Posts: 1,051
Likes: 0
From: Wilton, Ca.
Good kit, good people, and good price as far as I'm concerned. Worth 30 rwhp way back when I was at the 400 rwhp level due to the extra timing I could run. At my current level it's worth more. Pretty good bang for the buck in my opinion.

Jody
 
Reply

Trending Topics

Old Jun 14, 2005 | 10:23 PM
  #8  
owheelies's Avatar
Senior Member
Joined: Jan 2002
Posts: 382
Likes: 0
From: S FLA
REM has had very good results with these kits. Tim can't stop raving to me about them. The cooling effect, increase in octane and the low cost of refill are just fantastic. There's a good chance one will replace the nitrous set-up on my new turbo/motor combination.

Eric
 
Reply
Old Jun 14, 2005 | 10:24 PM
  #9  
NTIMD8's Avatar
Senior Member
Joined: Sep 2002
Posts: 1,366
Likes: 0
From: Ottawa, Canada
Does the MAF kit still work with an aftermarket SCT Big air MAF?
 
Reply
Old Jun 14, 2005 | 11:10 PM
  #10  
camcojb's Avatar
Senior Member
Joined: Feb 2003
Posts: 1,051
Likes: 0
From: Wilton, Ca.
Originally Posted by NTIMD8
Does the MAF kit still work with an aftermarket SCT Big air MAF?

Yes, works fine with mine as you set the voltage "on" point.

Jody
 
Reply
Old Jun 15, 2005 | 12:44 AM
  #11  
Falcon11's Avatar
Senior Member
Joined: May 2002
Posts: 926
Likes: 0
From: Los Angeles, CA
Anyone got any #'s after install? Boost increase?
 
Reply
Old Jun 15, 2005 | 01:31 AM
  #12  
fastspec's Avatar
Member
Joined: Feb 2005
Posts: 46
Likes: 0
From: Vancouver
We did an install last Friday. The results can be found here: http://www.nloc.net/forum/showthread...threadid=98464

Almost made as much power with the 92 Octane tune as with his 103 race tune. There is also this thread: http://www.nloc.net/forum/showthread...threadid=97781

Other details on the step by step tune here:
http://home.fastspecialties.com/inde...blog&Itemid=47

Ron
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 09:24 AM.